Drive Axle Set Replacement - Matrix E1X Service Manual

7.12 DRiVE aXlE SEt REplacEMENt

1) Remove the front shrouds as outlined in Section 7.1.
2) Remove the drive belt as outlined in Section 7.8.
3) Pull the cap off of the crank / pedal arm connection (Figure A).
4) Remove the large nut holding the pedal arm to the crank (Figure B). NOTE: Be sure to notice the order of the washers as you remove
them for reinstallation (Figure C).
figURE a
5) The front of the link arm can now be lifted away (Figure D).
figURE c
38
cHaptER 7: paRt REplacEMENt gUiDE
figURE b
figURE D