Section 6 Troubleshooting - Observint CD600 Series User Manual

SECTION 6
Before sending the camera for repair, please check below to make sure that the camera is
installed correctly. If it still does not perform adequately, please consult your supplier.
1. No picture on the monitor screen.
a. Check that all connected devices are powered on.
b. Confirm that the voltage is correct.
c. Confirm that the power supply provides enough current
to power the camera.
d. Check that all video cables are correctly connected.
2. The picture is not clear.
a. Check that your monitor is correctly adjusted.
b. Confirm that the glass in front of the lens is clean.
If there is dust, dirt or fingerprints on the glass, the image
quality will be affected. To clean the glass use a soft, dry
and non-abrasive cloth or a commercially available lens cleaning set.
c. Correctly adjust the focus (VF (varifocal) models only.)
3. The picture has interference.
a. The camera may be close to a high voltage source,
such as a power generator.
b. The BNC cable is not terminated properly.
c. The video cables are not connected properly.
SECTION 6: TROUBLESHOOTING
Troubleshooting
Infrared Turret Camera User Manual
19