Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for d&b audiotechnik B4-SU
Summary of Contents for d&b audiotechnik B4-SU
- Page 1 B4-SUB Manual (1.1 EN)
- Page 2 Symbols on the equipment Please refer to the information in the operating manual. WARNING! Dangerous voltage! Contents Safety precautions...............3 Information regarding use of loudspeakers..........3 B4-SUB..................4 Connections......................5 Operation with D6 or D12................5 Technical specifications..................6 Manufacturer's declarations..........7 EU conformity of loudspeakers (CE symbol)..........7 WEEE Declaration (Disposal)................7 General Information B4-SUB Manual...
-
Page 3: Safety Precautions
Safety precautions Information regarding use of loudspeakers Never stand in the immediate vicinity of loudspeakers driven at a high WARNING! level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non- critical sound levels (from approx. 95 dB SPL) can cause hearing damage if people are exposed to it over a long period. - Page 4 B4-SUB The B4-SUB is a compact high performance cardioid subwoofer for use with d&b E-Series and T-Series loudspeakers. The B4-SUB houses two long excursion neodymium drivers in an integrated cardioid setup: a 15“ driver in a bass-reflex design facing to the front and a 12”...
- Page 5 Connections The B4 cabinet is fitted with a pair of EP5 connectors. All five pins of both connectors are wired in parallel. The B4-SUB uses the pin assignments 3/4 and 5. Pin 5 is used for SenseDrive (only available when using a D12 amplifier and 5-wire cabling). Pins 1/2 are designated to E-Series and T-Series full range systems.
-
Page 6: Technical Specifications
Technical specifications B4-SUB system data Frequency response (–5 dB standard)..........40 Hz ... 150 Hz Frequency response (–5 dB 100 Hz mode)........40 Hz ... 100 Hz Max. sound pressure (single cabinet, 1 m, free field) with D12 ....131 dB Max. sound pressure (single cabinet, 1 m, free field) with D6 ......128 dB (SPLmax peak, pink noise test signal with crest factor of 4) B4-SUB subwoofer Nominal impedance....................6 ohms... - Page 7 Manufacturer's declarations EU conformity of loudspeakers (CE symbol) This declaration applies to: d&b B4-SUB loudspeaker, Z0610 manufactured by d&b audiotechnik GmbH. All production versions of this type are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.
- Page 8 d&b audiotechnik GmbH, Eugen-Adolff-Str. 134, D-71522 Backnang, Germany, Phone +49-7191-9669-0, Fax +49-7191-95 00 00...
Need help?
Do you have a question about the B4-SU and is the answer not in the manual?
Questions and answers