Page 3
(1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. C7-SUB Manual (3.0E) Safety instructions C7-SUB Manual (3.0E)
Page 4
Connections The C7-SUB cabinet is fitted with a pair of EP5 connectors. All pins n.c. of both connectors are wired in parallel. The C7-SUB uses the pin assignments 3/4 and 5 (Pin 5: SenseDrive - D12 only and in conjunction with 5-wire cables).
Page 5
Selecting C7-SUB mode in the E-PAC enables one C7-SUB cabinet to be driven at an output power of 300 Watts. We do not recommend that two C7-SUB cabinets are driven in LO IMP mode as the 6 dB reduction in input level to the loudspeakers results in no gain in acoustical output.
Page 6
Pin assignments ............3/4 and 5 (Pin 5: SenseDrive - D12) optional.........................2 x NL4 Pin assignments ......................2+ / 2– Weight .......................49 kg (108 lb) C7-SUB frequency response, standard and 100 Hz settings C7-SUB cabinet dimensions in mm [inch] C7-SUB Manual (3.0E)
Page 7
EU conformity of loudspeakers This declaration applies to loudspeakers manufactured by d&b audiotechnik AG and includes the types listed in the table below: − C7-SUB Z2259 All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.
Need help?
Do you have a question about the C7-SUB and is the answer not in the manual?
Questions and answers