Chapter 3 Front-Panel Operation
Remote Interface Configuration
I/O
5 Save the change and turn off the I/O configuration mode.
Config
CHANGE SAVED
The RS-232 baud rate and parity selections are stored in non-volatile memory, and
does not change when power has been off or after a remote interface reset. The power
supply displays a message to show that the change is now in effect. If the baud rate
and the parity are not changed, "NO CHANGE" will be displayed for one second.
N o t e
To exit the I/O configuration mode without any further changes, press the "I/O
Config" key until the "NO CHANGE" message is displayed.
50