Agilent Technologies E3633A User Manual page 32

Chapter 2 Initial Operation
Output Checkout
1
6 Ensure that the current can be adjusted from zero to the full rated value.
Adjust the knob until the ammeter indicates 0 amps and then until the ammeter
indicates 20.0 amps* or 7.0 amps**.
7 Turn off the power supply and remove the short from the output.
1
You can use the resolution selection keys to move the blinking digit to the right or
left when setting the current.
N o t e If an error has been detected during the output checkout procedures, the
annunciator will turn on. See "Error Messages" for more information starting on page
123 in chapter 5
*For Agilent E3633A Model **For Agilent E3634A Model
2
ERROR
19