Rear View - GeoVision GV-VS04H User Manual

1.7.2 Rear View

1.7.2.2 GV-VS04H / GV-VS14
No. Name
1 USB Port
2 Terminal Block
3 Ethernet Port
4 Power Out
5 Power In
Figure 1-7
Function
2 USB ports for installing portable storage devices.
The connectors for digital input, relay output, PTZ camera,
Wiegand device and GPS module control. See Chapter 9 Auxiliary
Device Connectors.
A plug for a 10/100 Ethernet or PoE.
Note: GV-VS14 does not support PoE function.
A plug to power on the camera, by using a DC Male-to-Male Cable,
directly through the GV-Video Server.
Note: When PoE is applied, you cannot power on the camera
through the GV-Video Server.
A plug for power input.
Introduction
1
9