Component Access / Removal
Light Switch Actuator
The light switch actuator is attached to the bottom of
the door assembly with screws. To remove the actuator
(See Figure 5-4):
1. Open door.
2. Extract screws securing switch actuator to door
frame.
Back Cabinet Cover and Insulation Pack
NOTE: Electrical shock hazard, take note of WARN-
INGS and CAUTIONS on page 5-2.
In order to remove components from the back of the
unit, the appliance will need to be removed from its
installation site.
To remove the back cover and insulation pack (See
Figure 5-5):
1. Extract screws from the back cover securing it to
the cabinet case.
2. Remove back cover with the baffle and the insula-
tion pack.
#3758664 - First Edition - July, 2005
Model 315W
Wine Storage
Figure 5-4. Light Switch Actuator Removal
Cabinet Case
Figure 5-5. Back Cover Removal
5-4
Insulation
Pack
Back
Cover
Baffle