Table of Contents
Advertisement
Step 4:
Name the array. Enter a nickname for the created array. Upper and lower case
alphabetic, numeric, space, and underscore characters are all applicable for
naming an array
Step 5:
View the array. A prompt appears to proceed with drive copy. The Source and
Destination drives are indicated as "M" and "m" in the Drive Menu.
NOTE:
1.
To reduce the chance of losing data, ALi imposes certain limitations on
the RAID configuration options. PATA drives connected on the same
IDE channel cannot be selected as the members of a RAID 1 array.
Avoid mixing PATA and SATA disk drives in a RAID 1 array.
2.
Always use disk drives of the same capacity to create a RAID array. The
excessive capacity of a larger disk drive cannot be utilized because data
stripes are equally distributed across all members of a RAID array.
F.4.3 Create JBOD for Integrated Capacity
Page 192
WAFER-GX
Step 0:
Advertisement
Table of Contents
