Akai MPC User Manual page 82

•
Strength: Click and drag this field up or down to set how strictly notes will be quantized (i.e.,
shifted toward the quantize value). Lower values move notes a little bit towards the closest
quantize value, resulting in a less mechanical feel than a strict quantization (a higher value).
•
Events: Click this drop-down menu select the target range for the time correction. You can
apply the time correction to All note events or to just the Selected ones. When Range is
selected, you can define the bars as well as the pads or keys that will be quantized. The
selection is done on the MPC hardware.
Hardware: When Range is selected, you can define the pads or keys to be quantized by
pressing their corresponding pads. Selected pads are shown in the Time Correct window. Use
the Cursor Buttons to navigate to the Events Range parameter to select the range of bars for
quantization.
Click Do It to apply the settings you made.
Click Close to cancel without making any changes.
Help Menu
About MPC shows information about the software version.
Check for Updates... checks online if a newer version of the software is available. You need an active
Internet connection to use this function.
Set Up MMC Control opens a PDF with instructions on how to allow your MPC hardware's transport
buttons to send MMC (MIDI Machine Control) messages from the MPC plugin to your host software. This
allows you to use your MPC hardware to control your host software's transport. This is available for
certain host software applications only.
MPC Help opens this PDF manual.
Mac OS X users: About MPC and Check for updates... are located in the MPC menu.
82