Program Edit Mode For Midi Programs And Plugin Programs - Akai MPC User Manual

Program Edit Mode for MIDI Programs and Plugin Programs

For MIDI Programs and Plugin Programs, Program Edit Mode looks
a bit different.
You will see an overview of all available parameters of your loaded
virtual instrument, including a corresponding rotary knob for editing.
We recommend editing a virtual instrument by using its own
graphical user interface, though.
To assign a parameter to one of the controls, click the drop-down
menu above the corresponding controller and select it from the
drop-down menu. In this way, you can easily set up arrangements
of 16 knobs to be controlled by your MPC hardware.
You can use Program Edit Mode to directly edit a set of parameters
in a section with your MPC hardware.
Hardware: To edit virtual instrument parameters, press the corresponding F button (Page1 to Page6).
Use the MPC hardware Q-Link Knobs for direct access of all 16 parameters that are displayed. You can
use the Cursor Buttons to navigate to a desired parameter location in the display and change the
parameter with the -/+ buttons or the Data Dial.
108