Akai MPC User Manual page 52

Hardware: To turn a Track's Program into a Plugin Program:
1. Press Main to enter Main Mode.
2. Use the F3 (Track-) and F4 (Track+) buttons to select the Track you want to route to a plugin.
3. Use the Cursor Buttons to select the Type field.
4. Use the Data Dial or -/+ buttons to select Plugin as the Program type, and then press F5 (Do It) to
confirm or F4 (Cancel) to cancel.
5. Next, select desired plugin:
•
If your Project already contains the desired plugin, use the Data Dial or -/+ buttons to select it.
•
If you want to add a new plugin to the Project, press Window. In the Edit Program window that
appears, press F3 (New) to create a new Program, and then use the Data Dial or -/+ buttons to
select Plugin, and press F5 (Do It). Back in Main Mode, use the Cursor Buttons to select the
Plg field, and then use the Data Dial or -/+ buttons to select the desired plugin. Press F4
(Select) to select it or F5 (Back) to cancel.
6. Repeat Steps 2-5 for every Track you want to route to a Plugin.
You can also adjust the volume levels and panning of your Tracks' Plugin Programs. Please see the
Routing part of the Track Mixer Mode chapter to learn how to do this.
The Edit Program window in the MPC hardware display
52