Akai MPC User Manual page 174

Pad Send Effects
Important: To use a send effect, you have to load an effect into the
corresponding send effect slot in Track Mixer Mode.
To load and edit a pad send effect and set its levels:
1. In the software, click the Track Mixer tab in the Mode Tab
Section.
2. In the Send Effects column on the right of the software
window, under one of the Return slots, click the downward
arrow ( ) of the drop-down menu of the slot you want to assign
an effect to. Select an effect from the window that appears.
3. Click the knob for that Return slot and drag it up or down to set
the effect level.
4. Click the Program Mixer tab in the Mode Tab Section.
5. Click the desired pad's channel's Send button.
6. Click the Send knob whose number corresponds to the Return slot and drag up or down to adjust
the send level.
Click a loaded effect name to open its graphic user interface to edit its parameters.
Hardware:
To load a pad send effect and set its return level:
1. Press Shift + Seq Edit / Effects.
2. Use the Cursor Buttons to select the desired Send effect slot.
3. Use the Data Dial or the -/+ buttons to open another page to select an effect. Click F4 (Select) to
load it, or click F3 (Back) to close the page.
•
To edit an effect's parameters, use the Cursor Buttons to select the effect in the Send effect slot
and press F6 (Edit). Use the Cursor Buttons to select a parameter and use the Data Dial or -/+
buttons to adjust it.
4. Use the Cursor Buttons to select the effect's Level parameter, and use the Data Dial or -/+ buttons
to set the return effect level.
174