Routing; Levels - Akai MPC User Manual

Routing

In the software, to set the routing for a channel:
1. Click Route button of the channel.
2. Click the drop-down menu just above the Pan knob.
3. Select the desired output (e.g., Out 3,4) to route the audio signal directly to this
output. (You need an audio interface that is equipped with more than two outputs.)
Hardware: To set the routing for a channel:
1. Press F6 (Route).
2. Use the Cursor Buttons to select a pad. You can use the Pad Bank buttons to
select different sets of 16 channels.
3. Use the Data Dial or -/+ buttons to select the desired output. (MPC Renaissance users: Out 1,2 are
routed to the Stereo Out jacks. Out 3,4 are routed to the Assignable Mix Out jacks.)

Levels

In the software, click the channel fader and drag it up or down to set the level. To view
more mixer channels, use the scroll bar under the channel faders at the bottom of the
window.
Hardware: To set the level for a channel, press F2 (Level) and use the corresponding Q-
Link Knob for editing. You can use the Pad Bank buttons to select different sets of 16
channels.
110