Application Programs; Counting - Acculab ECL6 Operating Instructions Manual

Application Programs

Counting

Step
a. Select application program
b. Select "Counting"
c. Press PRINT/ENTER.
Display shows reference piece selection menu.
Counting is blinking.
d. Automatically the display will show
the reference pieces.
Place container and press Tare
if required (display "tared").
e. Select reference sample quantity:
5, 10, 20, 50 or 100, and put the
reference on the scale. (quantity flashes)
f. Press PRINT/ENTER . Now "O" flashes.
Automatic optimization is active.
g. Place more reference samples on scale
(The number is x+2~2x times
of the reference pieces (x) selected in step e.)
h. Place uncounted parts/samples on the scale
i. Toggle between reference piece weight,
(G/N/DOWN)
total weight, and total pieces.
j. Unload the scale
k. Counting application: Clear
16
Key (or instruction)
(Fn/UP) > 2 sec
(Fn/UP) or (G/N/DOWN) repeatedly
(PRINT/ENTER)
(TARE/RIGHT)
(Fn/UP) or (G/N/DOWN) repeatedly
(PRINT/ENTER)
(ZERO/LEFT) > 2 sec
Display