Check Weighing - Acculab ECL6 Operating Instructions Manual

Check Weighing

Step
a. Select application program
b. Select "Checkweighing"
c. Press PRINT/ENTER to confirm.
d. Set lower limit; "LO" flashes.
e. Press PRINT/ENTER to confirm and save.
f. Set upper limit, "HI" flashes,
and then press PRINT/ENTER.
g. Press PRINT/ENTER to confirm and save.
h. Place the sample on the scale.
Display shows the difference and HI/LO symbol
i. Unload the scale
j. Checkweighing application: Clear
Key (or instruction)
(Fn/UP) > 2 sec
(Fn/UP) or (G/N/DOWN) Repeatedly
(PRINT/ENTER)
(Fn/UP) or (G/N/DOWN) and/or
(ZERO/LEFT) or (TARE/RIGHT)
(PRINT/ENTER)
(Fn/UP) or (G/N/DOWN) and/or
(ZERO/LEFT) or (TARE/RIGHT)
(PRINT/ENTER)
(ZERO/LEFT) > 2 sec
Display
17