Device Setting - Wintec WPL-2000 User Manual

1.
2.
4.

device Setting

Ð
1. Tab: Device Setting Tab.
2. System Unit: Select Metric or Imperial measure shown on device.
3. Device Zone: Adjust the time zone for device.
4. Password: Key in the password and press the "Enable Password" button to authorize
the password mechanism.
1. The maximum of password is 10 letters or digits.
NOTE
2. When you want to disable the password protection, just key in nothing in the
blanks of both "New" and "Confirm", and then click "Change Password" but-
ton.
5. Device ID: Add the Device Name and press the "Change" button to confirm it.
6. LCD Setting: Set the LCD contrast and back light duration here, and press "SET" button
to confirm the setting.
The LCD contrast has relations with the environmental temperature. The higher
NOTE
temperature is, the darker screen has, and then the lower LCD contrast is
needed; contrariwise, the lower temperature is, the lighter screen has, and the
higher LCD contrast is required.
7. Shake Mode: Enable or disable the shake mode function.
• When shake mode on, please set the duration time. If there is no movement for 5
minutes (default), WPL-2000 will turn off automatically, and turn on again when it
feels vibration.
• If WPL-2000 is turned off manually under shake mode on, it will not auto-turn on
even with any movement.
22
3.
5.
6.
7.