Setting Mode - Wintec WPL-2000 User Manual

Setting Mode

Under main mode, press the function button
longer to enter the setting mode.
Press the power button
Ð
No operation more than 15 seconds.
Ð
(The setting changed won't be saved)
Log Mode Setting
Ð
Confirm the option and back to Main Mode.
Confirm the option and Go to Shake Mode Setting.
Select Log Mode (Walk, Bicycle, car, User).
The detail of User Mode can be defined via inbuilt software - Win_Tool.
NOTE
Shake Mode (power saving) Setting
Ð
Confirm the option and back to Main Mode.
Confirm the option and Go to Usage capacity of log data page.
Enable(On) or disable (Off) the Shake Mode.
As Shake Mode On, the WPL-2000 will auto-shut off (sleep) if the device is
NOTE
motionless over 5 minutes (default, the duration can be set via Win_Tool), and
then auto-wake up when it feels any vibration.
How to enter Setting Mode?
How to back Main Mode?
1.LOG MODE
Walk
Walk Mode
1.LOG MODE
Car
Car Mode
2.SHAKE MODE
On
Shake Mode On
1.LOG MODE
Bicycle
Bicycle Mode
1.LOG MODE
User
User Mode
2.SHAKE MODE
Off
Shake Mode Off
11