Advertisement
6.2 Cook Door and Interlock Switch Adjustments
Door handle alignment is performed with the door closed and latched. The 0.110 (2,8)
dimension is adjusted by adding washers, item 9. Adjust the door pressure on the door
flange by compressing the 1.00 inch long Die Spring to the 0.875 (22,2) dimension
shown.
Door Switch alignment is performed with the door closed and latched. The switch
actuators should be centered in the over-travel region of the switch, (between the point
that the switch closes and where the switch actuator contacts the switch case). There is
one cook door monitor switch (right side) with the primary cook door interlock on the
right and the secondary cook door interlock on the left.
COOK DOOR LATCH/INTERLOCK SWITCH ASSEMBLY
ITEM
PART NO.
1
700-0088
2
101010
3
100940
4
102015
5
102015
6
700-0563-1
7
700-0563-2
8
101880
9
102253
10
700-0567
11
101550
12
102370
13
102240
TurboChef, Inc.
DESCRIPTION
ROD, U-SUPPORT
1/2-13 NUT, JAM
1/2-13 NUT, HEX
MICROSWITCH, MONITOR, (CDM)
MICROSWITCH, INTERLOCK, (CDP)/(CDS)
SWITCH BRACKET, RIGHT
SWITCH BRACKET, LEFT
DIE SPRING, 1" FREE LENGTH
1/2 WASHER, FLAT, SMALL PATTERN
BEARING, FLANGE, MODIFIED
SCREW, PPH, SS, #4-40 X .625
WASHER, LOCK, SPLIT, SS, #4
WASHER, FLAT, SMALL PATTERN, SS, #4
700-0655.DOC Rev B February 15, 1997
Page 43 of 62
Advertisement
