List Of Error Display / Indication; Operator Call Errors (By Alarm Led Blinking In Orange) - Canon PIXMA iP5300 Service Manual

Hide thumbs Also See for PIXMA iP5300:
Table of Contents

Advertisement

Part 1: MAINTENANCE

2. LIST OF ERROR DISPLAY / INDICATION

Errors are indicated by the LED, and warnings are displayed on the monitor of the computer connected to the printer.

2-1. Operator Call Errors (by Alarm LED Blinking in Orange)

LED
Error
blinking
[Error code]
2 times
No paper in the ASF. [1000] Set the paper in the ASF, and press the
No CD / DVD tray. [1001]
No paper in the cassette.
[1003]
No CD or DVD. [1002]
3 times
Paper jam. [1300]
Paper jam in the rear guide.
[1303]
Paper jam in the under
guide. [1304]
Front door close error.
[1250]
4 times
Ink may have run out.
[1600]
Ink tank not installed.
[1660]
5 times
- Print head not installed, or
not properly installed.
[1401]
- Print head temperature
sensor error. [1403]
- Faulty EEPROM data of
the print head. [1405]
- Print head hardware error.
[1682]
6 times
Inner cover open during
printing on paper (print
continuable). [1851]
Inner cover open during
printing on paper (print
NOT continuable). [1856]
Inner cover closed before
start of CD / DVD printing
(print continuable). [1850]
Inner cover closed during
CD / DVD printing (print
NOT continuable). [1855]
Solution
Resume/Cancel button.
Set the CD / DVD tray, and press the
Resume/Cancel button.
Set the paper in the cassette, and press the
Resume/Cancel button.
Set a CD or DVD in the CD / DVD tray (which is
ejected at error occurrence), and inset the CD /
DVD tray in the proper position. Then, press the
Resume/Cancel button.
Remove the jammed paper, and press the
Resume/Cancel button.
Open the paper output tray.
Replace the applicable ink tank, or press the
Resume/Cancel button to clear the error without ink
tank replacement.
Install the applicable ink tank(s) properly, and
confirm that the LED's of all the ink tanks light red.
Install the print head properly.
Close the inner cover, and press the Resume/Cancel
button.
Close the inner cover, and press the Resume/Cancel
button to clear the error. The paper being printed at
error occurrence will be ejected without printing the
remaining data for the ejected paper, then printing
will resume from the next page.
Open the inner cover which functions as the CD /
DVD tray feeder, set the CD / DVD tray in the
feeder, and press the Resume/Cancel button.
Open the inner cover, and press the Resume/Cancel
button to clear the error. The CD or DVD being
printed at error occurrence will be ejected without
1-4
TABLE OF CONTENTS
Remarks
Error during paper feeding from the ASF
Error in the duplexing transport unit
Error during paper feeding from the
cassette
The error is indicated if the paper output
tray is closed at start of a print job, or
while a print job is being performed.
When the error is cleared by pressing the
Resume/Cancel button, ink may run out
during printing.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents