Service Mode Operation Procedures; Destination Settings - Canon PIXMA iP5300 Service Manual

<Service mode operation procedures>
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the
buttons). The Power LED lights in green to indicate that a function is selectable.
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel
buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power
in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) according to the function
listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in
orange and Power in green, starting with Alarm LED.)
Time(s) LED indication
0 times Green (Power)
1 time Orange (Alarm)
2 times Green (Power)
3 times Orange (Alarm)
4 times Green (Power)
5 times Orange (Alarm)
6 times Green (Power)
7 times Orange (Alarm)
8 times Green (Power)
9 times Orange (Alarm)
10 times Green (Power)
11 times Orange (Alarm)
12 to 15 times Green (Power), Orange
16 times or more Orange (Alarm)
Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm LED (orange) lights steadily without any
changes.
<Destination settings>
In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the destination listed in the table
below, and press the Power button.
Time(s) LED indication
0 times Green (Power)
1 time Orange (Alarm)
2 times Green (Power)
3 times Orange (Alarm)
4 times Green (Power)
5 times Orange (Alarm)
6 times Green (Power)
7 times Orange (Alarm)
8 times Green (Power)
9 times Orange (Alarm)
10 times or
Green (Power)
more
Note: After setting the destination, confirm the model name and destination in service test print or EEPROM information
print.
See 3-4. Verification Items,
Power off
Service test print
EEPROM information print
EEPROM initialization
Ink absorber counter resetting

Destination settings

Print head deep cleaning
CD / DVD check pattern print
CD / DVD print position
correction (horizontal: X
direction)
CD / DVD print position
correction (vertical: Y
direction)
LF / Eject correction
Left margin correction
Return to the menu selection
(Alarm)
Return to the menu selection
No change of the destination
Japan
Korea
US
Europe
Australia
Asia
China
Taiwan
Canada, LAM
Return to the menu selection
(1) Service test print, or
Function
When the print head is not installed, the carriage returns and
locks in the home position capped.
See 3-4. Verification Items, (1) Service test print.
See 3-4. Verification Items, (2) EEPROM information print.
Press the Resume/Cancel button the specified number of
time(s) according to the destination.
Cleaning of both Black and Color
Not used in servicing.
Not used in servicing.
Not used in servicing.
Destination
(2) EEPROM information
1-21
Remarks
CD / DVD print
Supported
Not supported
Not supported
Supported
Supported
Supported
Supported
Supported
Supported
print.]