List Of Error Display / Indication; Operator Call Errors - Canon PIXMA iP5300 Service Manual

Part 1: MAINTENANCE

2. LIST OF ERROR DISPLAY / INDICATION

Errors are indicated by the LED, and warnings are displayed on the monitor of the computer connected to the
printer.
2-1. Operator Call Errors (by Alarm LED Blinking in Orange)
LED Error
blinking [Error code]
2 times No paper in the ASF.
[1000]
No CD / DVD tray.
[1001]
No paper in the cassette.
[1003]
No CD or DVD. [1002]
3 times Paper jam. [1300]
Paper jam in the rear
guide. [1303]
Paper jam in the under
guide. [1304]
Front door close error.
[1250]
4 times Ink may have run out.
[1600]
Ink tank not installed.
[1660]
5 times - Print head not installed,
or not properly
installed. [1401]
- Print head temperature
sensor error. [1403]
- Faulty EEPROM data of
the print head. [1405]
- Print head hardware
error. [1682]
6 times Inner cover open during
printing on paper (print
continuable). [1851]
Inner cover open during
Solution
Set the paper in the ASF, and press the
Resume/Cancel button.
Set the CD / DVD tray, and press the
Resume/Cancel button.
Set the paper in the cassette, and press the
Resume/Cancel button.
Set a CD or DVD in the CD / DVD tray
(which is ejected at error occurrence), and
inset the CD / DVD tray in the proper
position. Then, press the Resume/Cancel
button.
Remove the jammed paper, and press the
Resume/Cancel button.
Open the paper output tray.
Replace the applicable ink tank, or press the
Resume/Cancel button to clear the error
without ink tank replacement.
Install the applicable ink tank(s) properly,
and confirm that the LED's of all the ink
tanks light red.
Install the print head properly.
Close the inner cover, and press the
Resume/Cancel button.
Close the inner cover, and press the
TABLE OF CONTENTS
Remarks
Error during paper feeding from the
ASF
Error in the duplexing transport unit
Error during paper feeding from the
cassette
The error is indicated if the paper
output tray is closed at start of a print
job, or while a print job is being
performed.
When the error is cleared by pressing
the Resume/Cancel button, ink may
run out during printing.