Setting Of The Left Margin Correction Value - Canon PIXMA iP5300 Service Manual

3) Setting of the left margin correction value ("+" means to increase the left margin)
Press the Resume/Cancel button the specified number of time(s) according to the correction value listed in the table below, then
press the Power button.
Number of times the
Resume/Cancel button is
pressed (N)
7 times or more
After the value is set, the printer returns to the parameter mode selection. Repeat steps 2) and 3) to adjust the left margin in each parameter
mode: "back side of paper fed from the ASF," "front side of paper fed from the cassette," and "back side of paper fed from the cassette."
4) After the left margin correction in all the parameter modes is completed, press the Resume/Cancel button 4 times or more in the
parameter mode selection, then press the Power button to return to the service mode menu selection.
0 times Return to the parameter mode selection for left margin correction
1 time +1 pitch
2 times +2 pitches
3 times +3 pitches
4 times -1 pitch
5 times -2 pitches
6 times -3 pitches
Return to the service mode menu selection (no writing to the
EEPROM)
Left margin correction value
1-26