Canon PIXMA iP5300 Service Manual page 47

4 B Print results
Scratches on paper - PP-101D, PP-101, PR-
5 C Print results
Soiling on paper
6 C Print results
Skewed paper
feeding
7 B Print results
- Scratches on the PF
101, SG-101, etc.
- Paper feeding from the
cassette
- Paper feeding from the
- When multiple sheets
ASF
- Multiple number of
sheets loaded
The printer has been used Due to ink mist
for a long period of time attached to the ASF
with the ASF cover sub-pick-up rollers.
closed before printing is
If printing is done from
performed using the
the cassette with the
ASF.
ASF cover closed, ink
mist is kept inside the
printer, attaching to the
ASF sub-pick-up
rollers.
Since the sub-rollers
usually do not contact
the paper, ink mist can
easily accumulate,
especially during
printing on small-sized
paper which never
contacts the sub-
rollers.
- SG-101 When 10 sheets of
paper are set in the
- Paper feeding from the
ASF, and if they curl
ASF
significantly, the curled
- 10 sheets (max.) set in
portions of paper get
the ASF
over the cover guide,
not being aligned along
2-9
1. Perform Bottom
plate cleaning (from
the printer driver)
up to 3 times
2. If soiling on the
paper still remains
after 3 times of
Bottom plate
cleaning, wipe the
platen rib(s) and
their surroundings
with a cotton swab.
If the phenomenon
persists after
conducting 1 and 2,
servicing is required.
Service:
Wipe any soiling or dirt
off from the sheet feed
unit and the bottom
case unit ribs
- Change the paper
return lever due to feeding method from
paper feeding from the cassette to the
the cassette, and auto sheet feeder.
duplex printing path.
- If automatic duplex
printing is performed,
of paper are set, the cancel it, and, by
back side of paper setting only a single
being picked up sheet of paper in the
scratches the front auto sheet feeder,
side of paper beneath manually print each
(especially where the side of paper.
paper feed rollers
- Set only a single sheet
contact when picking
of paper in the auto
up the paper).
sheet feeder.
Clean the ASF sub-
rollers (see *3 for
details).
- Straighten the paper.
- Set 5 or less sheets of
paper in the ASF.
performed, and the
platen ribs were
cleaned with
cotton swab,
*1
.
paper gets
smeared.
*2
.
- Paper is
scratched.
- Marks appear on
printed paper.
- Paper feeds at an
angle.
- A margin appears
on printouts.