The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat step 2.)
Mode
Driver's door
unlocking mode
All doors unlocking
mode
■
Battery-saving function
In the following circumstances, the entry function is disabled in order to pre-
vent the vehicle and electronic key batteries from discharging.
●
When the entry function has not been used for 2 weeks or more
●
When the electronic key has been left within approximately 3 ft. (1 m) of
the vehicle for 10 minutes or more
The system will resume operation when...
●
The vehicle is locked using the door handle lock button.
●
The vehicle is locked/unlocked using the wireless remote control func-
tion. (→P. 38)
●
The vehicle is locked/unlocked using the mechanical key. (→P. 451)
1-2. Opening, closing and locking the doors
Unlocking doors
Hold the driver's door han-
dle to unlock only the
driver's door.
Hold the front passenger's
door handle to unlock all
doors
Hold either front and back
door handle to unlock all
doors
I n f o r ma t i o n P r o v i d e d b y :
Beep
Exterior: Beeps twice
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
1
31