Toyota RAV4 2010 Quick Reference Manual page 376

■
Engine oil consumption
●
The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
●
More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
●
A new engine consumes more oil.
●
When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accu-
rately.
●
Oil consumption: Max. 1.1 qt./600 miles, 0.9 Imp. qt./600 miles (1.0 L per
1000 km)
●
If your vehicle consumes more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600
miles (1000 km), contact your Toyota dealer.
■
Changing the engine oil (U.S.A. only)
To reset the oil change system, follow the procedure below:
Vehicles without smart key system
STEP 1
Turn the engine switch off with the trip meter A reading shown.
(→P. 156)
STEP 2
While pressing the trip meter reset button, turn the engine switch to
the "ON" position.
STEP 3
Press and hold the button until the trip meter displays "000000".
Vehicles with smart key system
STEP 1
Turn the "ENGINE START STOP" switch off with the trip meter A
reading shown. (→P. 156)
STEP 2
While pressing the trip meter reset button, turn the "ENGINE
START STOP" switch to IGNITION ON mode.
STEP 3
Press and hold the button until the trip meter displays "000000".
I n f o r ma t i o n P r o v i d e d b y :
4-3. Do-it-yourself maintenance
4
355