Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Interior Air conditioning and audio systems, as well as other features interior features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 2 Pictorial index Exterior Headlights (low beam) P. 165 ∗ Moon roof P. 84 Headlights (high beam) P. 165 Outside rear view Hood P. 346 mirrors P. 79 ∗ Turn signal lights P. 153 Front turn signal/parking and front side marker lights P.
Page 3 With spare tire Spare tire P. 430 ∗ Roof luggage carrier P. 198 License plate light Side doors P. 42 P. 165 Rear window defogger P. 233 Rear window wiper P. 171 Fuel filler door P. 88 Back door P. 46 Tires Rotation P.
Page 4 Pictorial index Interior Head restraints P. 65 Seat belts P. 68 SRS driver airbag P. 98 Power window switches P. 81 SRS front passenger airbag P. 98 Bottle holders P. 309 Cup holders P. 308 Rear seats P. 54 Glove box P.
Page 5 Vanity mirrors P. 313 Sun visors P. 312 Overhead console P. 307 ∗ Moon roof switches P. 84 ∗ SRS curtain shield airbags P. 98 Interior light P. 302 Coat hooks P. 321 Personal/interior lights P. 301 ∗ Rear view monitor system P.
Page 6 Pictorial index Interior Door lock switch P. 43 Window lock switch P. 81 Inside door lock buttons P. 43 Power window switches P. 81...
Page 7 Cup holders P. 308 Shift lever P. 150 Parking brake lever P. 154 AUX adapter P. 262 Outside rear view mirror switches P. 79...
Page 8 Pictorial index Instrument panel Horn P. 155 ∗ Gauges and meters P. 156 Four-wheel drive lock switch P. 192 Headlight switch P. 165 Audio system P. 236 Turn signal lever Navigation system * P. 153 ∗ Fog light switch P. 168 Emergency flasher switch P.
Page 9 Instrument panel light control dial P. 157 ∗ “DAC” switch P. 189 ∗ Power outlet main switch P. 315 ∗ : If equipped *: Refer to “Navigation System Owner’s Manual”.
Page 10 Pictorial index Instrument panel Without hands-free phone system ∗ Audio remote control switches P. 263 “DISP” switch P. 163 Engine (ignition) switch (without smart key system) P. 147 Cruise control switch P. 172 With hands-free phone system Telephone switch P. 271 Audio remote control switches P.
Page 11 With a manual air conditioning system Air conditioning system P. 220 Security indicator P. 92 Rear window defogger switch P. 233 ∗ Outside rear view mirror defogger switch P. 233 With an automatic air conditioning system Engine (ignition) switch (with smart key system) P.
Page 12 Pictorial index Instrument panel ∗ Seat heater switch P. 318 ∗ Windshield wiper de-icer switch P. 235 Power outlet P. 315 Enhanced VSC OFF switch P. 183 Cup holders P. 308...
Page 13 Pictorial index Luggage compartment ∗ Luggage cover P. 325 ∗ Second seatback release lever P. 57 Grocery bag hooks P. 323 ∗ Storage boxes P. 323 Cargo hooks P. 323 Power outlet P. 315 ∗ : If equipped...
Page 14: For Your Information
A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available on the market. You should know that these parts are not covered by Toyota warranty and that Toyota is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 15: Seat Belts P
Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 16 CAUTION General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 17 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 19 1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without smart key system Master keys Operating the wireless remote control function (→P. 38) Valet key Key number plate Vehicles with smart key system Electronic keys • Operating the smart key system (→P.
Page 20 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 450)
Page 21 1-2. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Electronic key Electronic key Electronic key Locks and unlocks the doors (→P.
Page 22 1-2. Opening, closing and locking the doors Unlocking and locking the doors and back door (front and back door handles only) Grip the handle to unlock the doors. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked.
Page 23 1-2. Opening, closing and locking the doors Antenna location and effective range Antenna location Antennas outside the cabin Antennas inside the cabin Antenna outside the luggage compartment...
Page 24 1-2. Opening, closing and locking the doors Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the outside front door handles and back door.
Page 25 1-2. Opening, closing and locking the doors Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly.
Page 26 1-2. Opening, closing and locking the doors The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.) Mode Unlocking doors Beep Hold the driver's door han- dle to unlock only the...
Page 27 1-2. Opening, closing and locking the doors Electronic key battery depletion The standard battery life is 1 to 2 years. (The battery becomes depleted even if the electronic key is not used.) If the smart key system or the wireless remote control function does not operate, or the detection area becomes smaller, the battery may be depleted.
Page 28 1-2. Opening, closing and locking the doors The doors may unlock if a large amount of water splashes on the door handle, such as in the rain or in a car wash. (The doors will automatically be locked after approximately 60 seconds if the doors are not opened and closed.) Gripping the door handle when wearing a glove may not unlock the door.
Page 29 1-2. Opening, closing and locking the doors When an alarm sounds: Take appropriate measures according to the following table. Alarm Situation Correction procedure Tried to lock the doors Retrieve the elec- Exterior alarm using the entry function tronic key from the sounds once for while the electronic key is passenger compart-...
Page 30 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure Tried to close the driver’s door after carrying the key Shift the shift lever to outside the vehicle with the Interior and exte- P, turn the “ENGINE “ENGINE START STOP” rior alarms sound START STOP”...
Page 31 1-2. Opening, closing and locking the doors Customization that can be configured at Toyota dealer It is possible to deactivate the smart key system etc. (Customizable features →P. 488) Certification for the smart key system For vehicles sold in the U.S.A.
Page 32 (→P. 28) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves. Then, consult your doctor to see if you should disable the entry function.
Page 33 1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles without smart key system Locks all doors Pushing holding: Sounds alarm Unlocks all doors Pressing the button unlocks the driver’s door.
Page 34 1-2. Opening, closing and locking the doors Panic mode Vehicles without smart key system When is pushed for longer than about one second, an alarm will sound for about 60 seconds and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle.
Page 35 When the wireless key has been left near an electrical appliance such as a personal computer Vehicles with smart key system →P. 30 Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control) can be changed. (Customizable features →P. 488)
Page 36 1-2. Opening, closing and locking the doors Certification for wireless remote control (vehicles without smart key system) For vehicles sold in the U.S.A. FCC ID: HYQ12BBY FCC ID: HYQ13BBZ FCC ID: HYQ12BDC FCC ID: HYQ13BDC NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 37 1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. Entry function (vehicles with smart key system) →P. 26 Wireless remote control →P.
Page 38 1-2. Opening, closing and locking the doors Door lock switch Locks all doors Unlocks all doors Inside lock button Locks the door Unlocks the door Pulling the door handle can open the front door even if the lock button is in the lock posi- tion.
Page 39 1-2. Opening, closing and locking the doors Locking the front doors from the outside without the wireless remote control or key Move the inside door lock button to the lock position. STEP Close the door. STEP Rear door child-protector locks The door cannot be opened from inside the vehicle when the child- protector lock is set.
Page 40 Depending on the position of the electronic key, the key may not be detected correctly and the door may be locked. Customization that can be configured at Toyota dealer Settings (e.g. door unlocking function) can be changed. (Customizable features →P. 488)
Page 41 →P. 27 Wireless remote control →P. 38 Door lock switch →P. 43 Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control) can be changed. (Customizable features →P. 488) CAUTION Caution while driving Keep the back door closed while driving.
Page 42 1-2. Opening, closing and locking the doors CAUTION Caution while parking If the open back door hides the stop, tail or rear turn signal lights, other road users must be warned of the presence of your vehicle by a warning triangle or other device.
Page 43 When closing the back door, make sure to press it lightly on its outer surface. Do not attach any accessories other than genuine Toyota parts to the back door. Such additional weight on the back door may interfere with the safety...
Page 44 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only)
Page 45 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat (driver’s side only) Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical height adjustment switch Seat lumbar support adjust- ment switch...
Page 46 1-3. Adjustable components (seats, mirrors, steering wheel) Flattening front seatbacks The front seats can be moved into a flat seat arrangement. Manual seat STEP Slide the second seats as far back as possible. (→P. 54) STEP Remove the front head restraint. (→P. 65) Slide the front seat further for- STEP ward than the front-most lock...
Page 47 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat STEP Slide the second seats as far back as possible. (→P. 54) STEP Remove the front head restraint. (→P. 65) Push the seat position adjusting STEP switch forward to slide the seat to the front-most position.
Page 48 1-3. Adjustable components (seats, mirrors, steering wheel) Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may appear the head restraint inner structure. These do not indicate problems. During rear-end collision...
Page 49 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats Second seats Vehicles with third seat Seat position adjustment levers Seatback angle adjustment levers When a person sits in the sec- ond center position, align all seatbacks at the same angle.
Page 50 1-3. Adjustable components (seats, mirrors, steering wheel) Vehicles without third seat Seat position adjustment levers Seatback angle adjustment levers When a person sits in the sec- ond center position, align all seatbacks at the same angle.
Page 51 1-3. Adjustable components (seats, mirrors, steering wheel) Third seats (if equipped) The third seats do not have a seat adjustment function. Moving a second seats for third seats entry (vehicles with third seats) Getting in the vehicle (right side only) Pull the lever forward and fold down the seatback.
Page 52 1-3. Adjustable components (seats, mirrors, steering wheel) Folding second seats Folding down the second seats will enlarge the luggage compart- ment. Before folding the second seats STEP Stow the second center seat belt. (→P. 70) Make sure the outside seat belt STEP passes through the hanger when folding the second seat.
Page 53 1-3. Adjustable components (seats, mirrors, steering wheel) Folding second seats STEP Slide the second seats as far back as possible. (→P. 54) From inside Pull down the seatback angle STEP adjustment lever and fold down the seatback. From outside (vehicles without third seats) Open the back door and pull the STEP lock release lever to fold down...
Page 54 1-3. Adjustable components (seats, mirrors, steering wheel) Stowing third seats (vehicles with third seats) Before stowing the third seats Stow the third seat belt buckles. STEP Pass the seat belts through the STEP seat belt hangers. This prevents the shoulder belt from being damaged.
Page 55 1-3. Adjustable components (seats, mirrors, steering wheel) Stowing third seats Pull and hold the seat lock STEP release strap and lift up the seat rearward and then push the seat down. Push the seat on the front side STEP against the floor and push the seat on rear side against the floor.
Page 56 1-3. Adjustable components (seats, mirrors, steering wheel) Returning third seats Pull the seat lock release strap, STEP lift the seat up and move the seat forward. Lock the seat into place. Make sure it is locked securely. Pull the seatback lock release STEP strap and raise the seatback.
Page 57 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Seat adjustment Observe the following precautions. Failure to do so may result in death or serious injuries. The seat belts provide maximum protection in a frontal or rear collision when the driver and the front passenger are sitting up straight and well back in the seats.
Page 58 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION When folding second seats Do not fold the second seatback when passengers sit or luggage is placed on the seat. Do not allow passengers to ride on the folded seat or in the luggage com- partment while driving.
Page 59 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION After adjusting a seat After adjusting the seat position, try sliding it forward and backward to make sure it is locked in position. After adjusting the seatback, push your body adjust the seatback to make sure it is locked in position.
Page 60 1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front seats Pull the head restraints up. Down Push the head restraint down while pushing the lock release button. Lock release button Second seats Lock release buttons Third seats (if equipped) Lock...
Page 61 1-3. Adjustable components (seats, mirrors, steering wheel) Removing the head restraints Except second center seat Pull the head restraint up while pushing the lock release button. Second center seat Installing the head restraints Except second center seat Align the head restraint with the installa- tion holes and push it down while press- ing the lock release button.
Page 62 1-3. Adjustable components (seats, mirrors, steering wheel) Second center seat Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. Adjusting the rear seat head restraints Always raise the head restraint one level from the stowed position when using.
Page 63 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. Correct use of the seat belts l Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 64 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the belt (front seats) Down Move the height adjuster up and down as needed. Second center seat belt The second center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation.
Page 65 1-3. Adjustable components (seats, mirrors, steering wheel) Releasing method The second center seat belt can be completely released only when necessary such as when folding down the second seats. Insert the key into the hole on STEP the center seat belt buckle to release the tab (with hook end), and allow the belt to retract.
Page 66 1-3. Adjustable components (seats, mirrors, steering wheel) Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
Page 67 1-3. Adjustable components (seats, mirrors, steering wheel) When not using the rear seat belts Second seats Pass the outer seat belts through the seat belt hangers and secure the seat belt plates to prevent the shoulder belts from being damaged. Third seats Pass the seat belts through the seat belt hangers to prevent the shoulder belts...
Page 68 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 69 Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 70 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION When using the second center seat belt Do not use the second center seat belt with either buckle released. Fastening only one of the buckles may result in death or serious injury in case of sudden braking or a collision.
Page 71 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP press the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 72 1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.
Page 73 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down. To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them.
Page 74 1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Vehicles without smart key system Mirror angle can be adjusted using the switch when the engine switch is in the “ACC” or “ON” position. Vehicles with smart key system Mirror angle can be adjusted using the switch when the “ENGINE START STOP”...
Page 75 1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors Push backward to fold the mir- rors. When the mirrors are fogged up (vehicles with outside rear view mirror defoggers) Turn on the mirror defoggers to defog the mirrors. (→P. 233) CAUTION When driving the vehicle Observe the following precautions while driving.
Page 76 1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. Closing One-touch closing (driver’s window only) Opening One-touch opening (driver’s window only) Pressing the switch in the opposite direction will stop win- dow travel partway.
Page 77 1-4. Opening and closing the windows and moon roof The power windows can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Operating the power windows after turning the engine off (front win- dows only) Vehicles without smart key system...
Page 78 1-4. Opening and closing the windows and moon roof CAUTION Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
Page 79 1-4. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. Opening and closing Open The moon roof stops slightly before the fully opened posi- tion.
Page 80 1-4. Opening and closing the windows and moon roof Operating the moon roof after turning the engine off Vehicles without smart key system The moon roof can be operated for approximately 45 seconds after the engine switch is turned to the “ACC” or “LOCK” position. They cannot, how- ever, be operated once either front door is opened.
Page 81 Check to make sure that the moon roof is completely closed and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer.
Page 82 1-4. Opening and closing the windows and moon roof CAUTION Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.
Page 83 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. Before refueling the vehicle Vehicles without smart key system Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed. Vehicles with smart key system Turn the “ENGINE START STOP”...
Page 84 1-5. Refueling Hang the fuel tank cap on the STEP back of the fuel filler door. Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly to the opposite direction.
Page 85 This may cause static electricity to build up, resulting in a possible ignition hazard. When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 86 1-5. Refueling NOTICE Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface.
Page 87 1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles without smart key system: The indicator light flashes after the key has been...
Page 88 1-6. Theft deterrent system System maintenance The vehicle has a maintenance-free type engine immobilizer system. Conditions that may cause the system to malfunction If the key is in contact with a metallic object If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle Certifications for the engine immobilizer system For vehicles sold in the U.S.A.
Page 89 1-6. Theft deterrent system NOTICE To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
Page 90 1-6. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.
Page 91 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 49) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 92 1-7. Safety information CAUTION While driving Do not adjust the position of the driver's seat while driving. Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 93 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 94 1-7. Safety information Airbag system components Curtain shield airbags (if “AIR BAG ON” and “AIR equipped) BAG OFF” indicator lights Side airbags (if equipped) SRS warning light Front passenger airbag Driver airbag Side and curtain shield air- Driver’s seat position sen- bag sensors (if equipped) Front airbag sensors Driver’s seat belt buckle...
Page 95 1-7. Safety information The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and an airbag sensor. In certain types of severe frontal or side impacts, the SRS airbag sys- tem triggers the airbag inflators.
Page 96 1-7. Safety information SRS airbag deployment conditions Front airbags The front SRS airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to a 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform).
Page 97 1-7. Safety information Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. Hitting a curb, edge of pavement or hard surface Falling into or jumping over a deep hole...
Page 98 1-7. Safety information Types of collisions that may not deploy the SRS side airbags and cur- tain shield airbags (if equipped) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment.
Page 99 1-7. Safety information When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Do not disconnect the battery cables before contacting your Toyota dealer. Any of the SRS airbags have been inflated.
Page 100 1-7. Safety information CAUTION SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts. The SRS driver airbag deploys with considerable force, and can cause death or serious injury especially if the driver is very close to the airbag.
Page 101 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 102 1-7. Safety information CAUTION SRS airbag precautions Do not sit on the edge of the seat or lean against the dashboard. Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. Do not drive the vehicle while the driver or passenger has items resting on their knees.
Page 103 1-7. Safety information CAUTION SRS airbag precautions Do not attach anything to or lean any- thing against areas such as the dash- board or steering wheel pad. These items can become projectiles when SRS driver and front passenger airbags deploy. Vehicles with side airbags and curtain shield airbags: Do not attach anything to areas such as the door, windshield...
Page 104 Toyota dealer. Vehicles with side and curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer.
Page 105 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 106 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for front passenger. SRS warning light Front passenger's seat belt reminder light “AIR BAG OFF”...
Page 107 1-7. Safety information Conditions and operation of the front passenger occupant classification system Adult* “AIR BAG ON” and “AIR BAG OFF” indi- “AIR BAG cator lights ON” Indicator/ SRS warning light warning light Front passenger's seat belt reminder Flashing* light Front passenger airbag Side airbag on the front passenger seat Devices...
Page 108 1-7. Safety information Unoccupied “AIR BAG ON” and “AIR BAG OFF” indi- Not illumi- cator lights nated Indicator/ SRS warning light warning light Front passenger's seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Devices Curtain shield airbag in the front passen- Activated...
Page 109 1-7. Safety information : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 118) : In case the indicator is not illuminated, consult this manual as for installing the child restraint system properly.
Page 110 1-7. Safety information CAUTION Front passenger occupant classification system precautions Observe the following precautions regarding front passenger occupant clas- sification system. Failure to do so may cause death or serious injury. Wear the seat belt properly. Make sure the front passenger's seat belt tab has not been left inserted into the buckle before someone sits in the front passenger seat.
Page 111 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. Child restraint systems installed on the second seat should not contact the front seatbacks.
Page 112 1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 113 1-7. Safety information Types of child restraint Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat...
Page 114 In an accident, the child can be crushed against the windshield, or between you and the vehicle's interior. Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 115 1-7. Safety information CAUTION Child restraint precautions Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of a sudden stop, sudden swerve or accident.
Page 116 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the outside rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 117 1-7. Safety information Second outside seats: Anchor brackets (for top tether strap) Anchor brackets are provided for the second outside seats. Second center seat: Anchor brackets (for top tether strap) An anchor bracket is provided for the second center seat.
Page 118 1-7. Safety information Installation with LATCH system (second outside seats only) Fold the seatback while pulling STEP the lever. Return the seatback and secure it at the 1st lock posi- tion (most upright position). Adjust the seatback to the 3rd lock position.
Page 119 1-7. Safety information Type B Latch the buckles onto the STEP LATCH anchors. The bars are installed in the clearance between the seat cush- ion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
Page 120 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing ⎯ Infant seat/convertible seat Place the child seat on the rear STEP seat facing the rear of the vehi- cle. Run the seat belt through the STEP child seat and insert the plate into the buckle.
Page 121 1-7. Safety information While pushing the child seat STEP down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 122 1-7. Safety information While pushing the child seat into STEP the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 123 1-7. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Second center seat: Release the center seat belt as shown in the illustration after removing the child restraint. Child restraint systems with a top tether strap (second seats only) Outside seats...
Page 124 1-7. Safety information Slide the seats forward slightly if STEP it is in the rear-most position. Secure the child restraint using STEP Front of vehicle the seat belt. Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.
Page 125 1-7. Safety information Center seat Open the anchor bracket cover. Secure the child restraint using the seat belt. Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2.
Page 126 1-7. Safety information CAUTION When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode. (→P. 71) ALR mode causes the belt to tighten only which could cause injury or dis- comfort to the child.
Page 127 1-7. Safety information CAUTION When installing a child restraint system When installing a child restraint system in the rear center seat, adjust both seat cushions to the same position and align seatbacks at the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in the event of sudden braking, sudden swerving or an accident.
Page 128 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. Starting the engine →P. 143, 147 Driving STEP With the brake pedal depressed, shift the shift lever to D. (→P. 150) STEP Release the parking brake. (→P.
Page 129 Drum-in-disc type parking brake system Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodi- cally or whenever the parking brake shoes and/or drums are replaced. Have your Toyota dealer perform the bedding-down.
Page 130 If the smell of exhaust is noticed inside the vehicle, open the windows and check that the back door is closed. Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately.
Page 131 2-1. Driving procedures CAUTION Do not shift the shift lever to P while the vehicle is moving. Doing so can damage the transmission and may result in a loss of vehicle control. Do not shift the shift lever to R while the vehicle is moving forward. Doing so can damage the transmission and may result in a loss of vehicle control.
Page 132 2-1. Driving procedures CAUTION Do not drive in excess of the speed limit. Even if the legal speed limit per- mits it, do not drive over 85 mph (140 km/h) unless your vehicle has high- speed capability tires. Driving over 85 mph (140 km/h) may result in tire failure, loss of control and possible injury.
Page 133 2-1. Driving procedures CAUTION If the vehicle is stopped on an incline, in order to prevent accidents caused by the vehicle rolling forward or backward, always depress the brake pedal and securely apply the parking brake as needed. Avoid revving or racing the engine. Running the engine at high speed while the vehicle is stopped may cause the exhaust system to overheat, which could result in a fire if combustible material is nearby.
Page 134 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 135 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. The rotor damage can result if the pads are not replaced when needed.
Page 136 Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. Brake function Changes in quantity and quality of oil and fluid used for the engine, tran- saxle, transfer (4WD models), rear differential (4WD models), etc.
Page 137 2-1. Driving procedures Engine (ignition) switch (vehicles with smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. Starting the engine The engine can be started in any mode by operating the “ENGINE START STOP”...
Page 138 2-1. Driving procedures Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) OFF* The emergency flashers can be used. ACCESSORY mode Some electrical components such as the audio system can...
Page 139 When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. Auto power off function If the vehicle is left in ACCESSORY mode for more than an hour with the shift lever in P, the “ENGINE START STOP”...
Page 140 2-1. Driving procedures CAUTION When starting the engine Always start the engine while sitting in the driver's seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. Stopping the engine in an emergency If you want to stop the engine in an emergency while driving the vehicle, push and hold the “ENGINE START STOP”...
Page 141 2-1. Driving procedures Engine (ignition) switch (vehicles without smart key system) Starting the engine STEP Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Sit in the driver’s seat and firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 142 2-1. Driving procedures Turning the key from “ACC” to “LOCK” STEP Shift the shift lever to P. (→P. 150) STEP Push in the key and turn to the “LOCK” position. Steering lock release When starting the engine, the engine switch may seem stuck in the “LOCK” position.
Page 143 2-1. Driving procedures NOTICE To prevent battery discharge Do not leave the key in the “ACC” or “ON” position for a long period if the engine is not running. When starting the engine Do not crank for more than 30 seconds at a time. This may overheat the starter and wiring systems.
Page 144 2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. Shifting the shift lever 4-speed models 5-speed models...
Page 145 2-1. Driving procedures Vehicles without smart key system: While the engine switch is in the “ON” position, depress the brake pedal and move the shift lever. Vehicles with smart key system: While the “ENGINE START STOP” switch is in IGNITION ON mode, depress the brake pedal and move the shift lever.
Page 146 2-1. Driving procedures Downshifting restrictions The shift lever cannot be downshifted if the following speeds are exceeded. 4-speed models (2WD) mph (km/h) Downshifting Maximum speed 3 → 2 75 (121) 2 → L 37 (60) 4-speed models (4WD) mph (km/h) Downshifting Maximum speed 3 →...
Page 147 2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 148 2-1. Driving procedures Parking brake Canada U.S.A. Sets the parking brake Fully apply the parking brake while depressing the brake pedal. Releases the parking brake Slightly raise the lever and lower it completely while pressing the but- ton. Usage in winter time See “Winter driving tips”...
Page 149 2-1. Driving procedures Horn To sound the horn, press on or close to the mark. After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 150 2-2. Instrument cluster Gauges and meters Vehicles without smart key system The following gauges, meters and displays illuminate when the engine switch is in the “ON” position. Vehicles with smart key system The following gauges, meters and displays illuminate when the “ENGINE START STOP”...
Page 151 2-2. Instrument cluster Trip information display →P. 162 Automatic transmission shift position indicator lights →P. 150 Odometer/trip meter Odometer Displays the total distance the vehicle has been driven. Trip meter Displays the distance the vehicle has been driven since the meter was last reset.
Page 152 2-2. Instrument cluster NOTICE To prevent damage to the engine and its components Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. The engine may be overheating if the temperature gauge is in the red zone (H).
Page 153 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel...
Page 154 They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
Page 155 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 156 2-2. Instrument cluster Trip information display The trip information display presents the driver with a variety of driv- ing-related data, including the current outside temperature. Trip information (→P. 163) Displays outside temperature and fuel consumption.
Page 157 2-2. Instrument cluster Trip information Type A Push the “DISP” button to dis- play trip information. Display items can be switched by pressing the “DISP” button. Type B Push the “DISP” button to dis- play trip information. Display items can be switched by pressing the “DISP”...
Page 158 2-2. Instrument cluster Average fuel consumption Displays the average fuel consumption since the function was reset. To reset the calculations, return the mode to “AVG” and push and hold the “DISP” button until the display shows “0”. Display In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change.
Page 159 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. The side marker, park- ing, tail, license plate and instrument panel lights turn on. The headlights and all lights listed above turn U.S.A.Canada The headlights and parking lights turn on (if equipped) and off automatically.
Page 160 To turn the lights on again, turn the “ENGINE START STOP” switch to IGNI- TION ON mode, or turn the headlight switch off and then back to Customization that can be configured at Toyota dealer Settings (e.g. light sensor sensitivity) can be deactivated.
Page 161 2-3. Operating the lights and wipers NOTICE To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not run- ning.
Page 162 2-3. Operating the lights and wipers ∗ Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Front fog lights on ∗...
Page 163 2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation. Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency...
Page 164 2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. The windshield wipers and washer can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. If no windshield washer fluid sprays Check that the washer nozzles are not blocked and if there is washer fluid in the windshield washer fluid reservoir.
Page 165 2-3. Operating the lights and wipers Rear window wiper and washer Intermittent window wiper operation Normal window wiper oper- ation Washer/wiper dual opera- tion Washer/wiper dual opera- tion The rear window wiper and washer can be operated when Vehicles without smart key system The engine switch is in the “ON”...
Page 166 2-4. Using other driving systems Cruise control Use cruise control to maintain a set speed without using the acceler- ator. Indicator Cruise control switch Setting the vehicle speed Turn the “ON-OFF” button on. STEP Press the button once more to deactivate the cruise control.
Page 167 2-4. Using other driving systems Adjusting the speed setting Increase speed Decrease speed Hold the lever until the desired speed setting is obtained. Fine adjustment of the set speed can be made by lightly pushing the lever up or down and releasing it.
Page 168 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Contact your Toyota dealer and have your Toyota inspected. CAUTION To avoid operating the cruise control by mistake Keep the “ON-OFF”...
Page 169 2-4. Using other driving systems Rear view monitor system (vehicles with auto anti-glare inside rear view mirror) The rear view monitor system assists the driver by displaying an image of the area behind the vehicle. The image is displayed in reverse on the screen.
Page 170 2-4. Using other driving systems Displayed area Vehicles without spare tire The area covered by the camera is lim- ited. Objects that are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary according to vehicle orientation or road conditions.
Page 171 2-4. Using other driving systems Rear view monitor system camera Vehicles without spare tire In the following cases, it may become difficult to see the images on the screen, even when the system is func- tioning correctly. The vehicle is in a dark area, such as at night.
Page 172 2-4. Using other driving systems Smear effect If a bright light, such as sunlight reflected off the vehicle body, is picked up by the camera, a smear effect* char- acteristic to the camera may occur. *: Smear effect: A phenomenon that occurs when a bright light is picked up by the camera;...
Page 173 Conditions which may affect the rear view monitor system If the back of the vehicle has been hit, the camera’s position and mounting angle may have changed. Have the vehicle inspected by your Toyota dealer. Rapid temperature changes, such as when hot water is poured on the vehicle in cold weather, may cause the system to function abnormally.
Page 174 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ABS (Anti-lock Brake System) Helps to prevent wheel lock when the brakes are applied suddenly, or if the brakes are applied while driving on a slippery road surface.
Page 175 2-4. Using other driving systems Hill-start assist control (if equipped) (→P. 187) Downhill assist control system (if equipped) (→P. 189) When the Enhanced VSC/TRAC are operating If the vehicle is in danger of slip- ping or if any of the drive wheels spins, the slip indicator light flashes to indicate that the Enhanced VSC/TRAC systems...
Page 176 2-4. Using other driving systems To disable TRAC and/or Enhanced VSC (2WD models) If the vehicle gets stuck in fresh snow or mud, TRAC and Enhanced VSC may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it.
Page 177 2-4. Using other driving systems To disable TRAC and/or Enhanced VSC (4WD models) If the vehicle gets stuck in fresh snow or mud, TRAC and Enhanced VSC may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it.
Page 178 2-4. Using other driving systems Automatic reactivation of TRAC and Enhanced VSC Vehicles without smart key system Turning the engine switch OFF after turning off the TRAC and Enhanced VSC systems will automatically re-enable them. Vehicles with smart key system Turning the “ENGINE START STOP”...
Page 179 10 minutes. If the slip indicator comes on It may indicate a malfunction in the Enhanced VSC, TRAC and AUTO LSD function. Contact your Toyota dealer. CAUTION The ABS does not operate effectively when Tires with inadequate gripping ability are used (such as excessively worn tires on a snow covered road).
Page 180 The ABS and Enhanced VSC systems will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect...
Page 181 2-4. Using other driving systems ∗ Hill-start assist control Hill-start assist control helps to prevent the vehicle from rolling backwards when starting on an incline or slippery slope. To engage hill-start assist con- trol, further depress the brake pedal when the vehicle is stopped completely.
Page 182 Use the slip indicator status (flashing or off) to confirm if hill-start assist control is operating. If the slip indicator comes on It may indicate a malfunction in the system. Contact your Toyota dealer. CAUTION Hill-start assist control Do not overly rely on hill-start assist control.
Page 183 2-4. Using other driving systems ∗ Downhill assist control system With the downhill assist control system, the vehicle is able to descend a steep hill while maintaining a constant low speed of about 3 mph (5 km/h) without brake pedal operation. Activating the downhill assist control system Press the “DAC”...
Page 184 Refrain from using the system until the downhill assist control system indicator stays on. (There is no problem with continuing driving normally.) If the slip indicator comes on It may indicate a malfunction in the system. Contact your Toyota dealer.
Page 185 2-4. Using other driving systems CAUTION Conditions which may affect the downhill assist control system opera- tion Do not rely too heavily on the downhill assist control system. On extremely steep inclines, icy surfaces or muddy roads, the vehicle may slip and the system may not be able to maintain the constant low vehicle speed of about 3 mph (5 km/h), leading to an accident causing death or serious injury.
Page 186 2-4. Using other driving systems Four-wheel drive lock switch (4WD models) Four-wheel drive lock mode can be used when a large amount of drive power needs to be applied to all the wheels, such as when the vehicle gets stuck in mud and you need to free it. Press the switch.
Page 187 2-5. Driving information Utility vehicle precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications.
Page 188 2-5. Driving information CAUTION Off-road vehicle precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Therefore, the driver and all passengers should fasten their seat belts whenever the vehicle is moving.
Page 189 2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre- cautions to ensure your driving enjoyment and to help prevent the closure of areas to off-road vehicles. l Drive your vehicle only in areas where off-road vehicles are permit- ted to travel.
Page 190 2-5. Driving information CAUTION Off-road driving precautions Always observe the following precautions to minimize the risk of death or serious personal injury or damage to your vehicle: Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places.
Page 191 2-5. Driving information NOTICE When you drive through water If driving through water, such as when crossing shallow streams, first check the depth of the water and the bottom of the stream for firmness. Drive slowly and avoid deep water. Inspection after off-road driving Sand and mud that has accumulated around brake discs may affect brak- ing efficiency and may damage brake system components.
Page 192 2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. l Stow cargo and luggage in the luggage compartment whenever possible. Be sure all items are secured in place. l Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 193 2-5. Driving information Slide the cross rails to the appro- STEP priate position for loading lug- gage turn knobs clockwise to tighten the cross rails securely. Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit⎯...
Page 194 2-5. Driving information (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Example on your vehicle Cargo capacity Total load capacity...
Page 195 2-5. Driving information As shown in the above example, if the number of occupants increases, the cargo and luggage load will be reduced by an amount that equals the increased weight due to the additional occupants. In other words, if an increase in the number of occupants causes an excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you must reduce the cargo and luggage on your vehicle.
Page 196 2-5. Driving information CAUTION Capacity and distribution Do not exceed the maximum axle weight rating or the total vehicle weight rating. Even if the total load of occupant's weight and the cargo load is less than the total load capacity, do not apply the load unevenly. Improper loading may cause deterioration of steering or braking con- trol which may cause death or serious injury.
Page 197 2-5. Driving information NOTICE When loading luggage (vehicles with moon roof) Be careful not to scratch the surface of the moon roof.
Page 198 2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. Total load capacity: Without third seat 825 lb. (370 kg) With third seat 1155 lb. (520 kg) Total load capacity means the combined weight of occupants, cargo and luggage.
Page 199 2-5. Driving information CAUTION Overloading the vehicle Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident.
Page 200 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. Pre-winter preparations l Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 201 2-5. Driving information When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. When parking the vehicle Park the vehicle and move the shift lever to P without setting the parking brake. The parking brake may freeze up, preventing it from being released.
Page 202 2-5. Driving information Tire chain installation Observe the following precautions when installing and removing chains. Install and remove tire chains in a safe location. Install tire chains on the front tires. Install tire chains following the instructions provided in the accompanying manual.
Page 203 Vehicles with a tire pressure warning system: Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 204 For your safety and the safety of others, do not overload the vehicle or trailer. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Weight limits Confirm that the total trailer weight, gross vehicle weight, gross axle weight and trailer tongue load are all within the limits.
Page 205 The total trailer weight and tongue load can be measured with platform scales found at highway weighing stations, building supply companies, trucking companies, junk yards, etc. Total trailer weight Tongue load Towing a trailer Contact your Toyota dealer for further information about additional requirements such as a towing kit, etc.
Page 206 Break-in schedule Toyota recommends that you do not use a new vehicle or a vehicle with any new power train components (engine, transmission, differential, wheel bear- ings, etc.) to tow a trailer for the first 500 miles (800 km) of driving.
Page 207 2-5. Driving information CAUTION To avoid accident or injury Do not exceed the trailer hitch assembly weight, gross vehicle weight, gross axle weight and trailer tongue load capacities. Never load more weight in the back than in the front of the trailer. About 60% of the load should be in the front half of the trailer, and the remaining 40% in the rear.
Page 208 NOTICE When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. Do not use axle-mounted hitches, as they can cause damage to the axle housing, wheel bearings, wheels or tires.
Page 209 2-5. Driving information l Reversing with a trailer attached is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left. Move your hand to the right to move the trailer to right.
Page 210 2-5. Driving information l Due to the added load of the trailer, your vehicle's engine may overheat on hot days (at temperatures over 85°F [30°C]) when driving up a long or steep grade. If the engine coolant temperature gauge indicates overheating, immediately turn off the air condition- ing (if in use), pull your vehicle off the road and stop in a safe spot.
Page 211 2-5. Driving information CAUTION To avoid an accident Do not exceed 45 mph (72 km/h) or posted towing speed limit, whichever is lower. As instability (swaying) of the towing vehicle-trailer combination increases as speed increases, exceeding 45 mph (72 km/h) may cause loss of control.
Page 212 2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE To avoid serious damage to your vehicle Do not tow your vehicle with 4 wheels on the ground.
Page 213: Air Conditioning System
3-1. Using the air conditioning system and defogger ∗ Manual air conditioning system Air outlet selection dial Temperature control dial Outside air or recirculated air mode Air conditioning on/off switch Fan speed control dial Adjusting the settings Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool).
Page 214 3-1. Using the air conditioning system and defogger Changing the air outlets Set the air outlet selection dial to an appropriate position. The positions between the air outlet selections shown below can be also selected for more detailed adjustment. Air flows to the upper body. Air flows to the upper body and feet.
Page 215 3-1. Using the air conditioning system and defogger Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode. It is not possible to return to recircu- lated air mode when the dial is set at this position.
Page 216 3-1. Using the air conditioning system and defogger Adjusting the position of the air outlets Front outlets (center) Direct air flow to the left or right, up or down. Front outlets (right and left sides) Direct air flow to the left or right, up or down.
Page 217 There may be a problem in the air conditioning system if the indicator light keeps flashing. Turn the air conditioning system off and have it inspected by your Toyota dealer. When is selected for the air outlets used For your driving comfort, air flowing to the feet may be warmer than air flow- ing to the upper body depending on the position of the temperature setting.
Page 218 3-1. Using the air conditioning system and defogger NOTICE To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is off.
Page 219 3-1. Using the air conditioning system and defogger ∗ Automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Driver's side Changes the air outlets used temperature control Air flow display Outside air or recirculated air mode Air conditioning on/off switch...
Page 220 3-1. Using the air conditioning system and defogger Adjusting the settings Adjusting the temperature setting Press “∧” on to increase the temperature and “∨” to decrease the temperature. The air conditioning system switches between individual and simulta- neous modes each time is pressed.
Page 221 3-1. Using the air conditioning system and defogger Changing the air outlets Press the desired button, The air flow shown on the display indicates the following. Air flows to the upper body. Air flows to the upper body and feet. : Vehicles with third seats Air flows to the feet.
Page 222 3-1. Using the air conditioning system and defogger Air flows to the feet and the windshield defogger operates. : Vehicles with third seats Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recircu- lated air mode (indicator on) each time is pressed.
Page 223 3-1. Using the air conditioning system and defogger Micro dust and pollen filter Press Outside air mode will be switched to recirculated air mode. Pollen is removed from the air and the air flows to the upper part of the body.
Page 224 3-1. Using the air conditioning system and defogger Front outlets (right and left sides) Direct air flow to the left or right, up or down. Opening and closing the side outlets Open the vent. Close the vent. Using the automatic mode Fan speed is adjusted automatically in accordance with the temperature set- ting and ambient conditions.
Page 225 There may be a problem in the air conditioning system if the indicator light keep flashing. Turn the air conditioning system off and have it inspected by your Toyota dealer. Air conditioning odors During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system.
Page 226 3-1. Using the air conditioning system and defogger CAUTION To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the wind- shield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 227 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers The rear window defogger is used to defog the rear window. The out- side rear view mirror defoggers are used to remove frost, dew or raindrops from the outside rear view mirrors.
Page 228 3-1. Using the air conditioning system and defogger The defogger can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Outside rear view mirror defoggers (vehicles with outside rear view mirror defoggers) Turning the rear window defogger on will turn the outside rear view mirror...
Page 229 3-1. Using the air conditioning system and defogger ∗ Windshield wiper de-icer This feature is used to prevent ice from building up on the wind- shield and wiper blades. On/off The de-icer will automatically turn off after approximately 15 minutes. The de-icer can be operated when Vehicles without smart key system The engine switch is in the “ON”...
Page 230 3-2. Using the audio system Audio system types With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Without navigation system (type A) CD player with changer controller and AM/FM radio Without navigation system (type B) CD player with changer and AM/FM radio...
Page 231: Table Of Contents
3-2. Using the audio system Without navigation system (type C) CD player with changer and AM/FM radio Title Page Using the radio P. 239 Using the CD player P. 245 Playing back MP3 and WMA discs P. 252 Optimal use of the audio system P.
Page 232 3-2. Using the audio system CAUTION For vehicles sold in U.S.A. and Canada (for U.S.A. and Canada) Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. Laser products •...
Page 233: Using The Radio
3-2. Using the audio system Using the radio Power Volume Adjusting the frequency Station selector (AM, FM mode) or channel (SAT mode) Seeking the Changing the frequency channel Displaying radio text messages · SAT/FM mode buttons Scanning for receivable stations ®...
Page 234 3-2. Using the audio system ® Scanning radio stations (excluding XM Satellite Radio) Scanning the preset radio stations STEP Press and hold until you hear a beep. Preset stations will be played for 5 seconds each. STEP When the desired station is reached, press once again.
Page 235 3-2. Using the audio system Changing the channel category Press “∧” or “∨” on ® Scanning XM Satellite Radio channels l Scanning channels in the current category STEP Press STEP When the desired channel is reached, press again. l Scanning preset channels STEP Press and hold until you hear a beep.
Page 236 3-2. Using the audio system When the battery is disconnected Station presets are erased. Reception sensitivity Cargo loaded on the roof luggage carrier, especially metal objects, may ® adversely affect the reception of XM Satellite Radio. Maintaining perfect radio reception at all times is difficult due to the con- tinually changing position of the antenna, differences in signal strength and surrounding objects, such as trains, transmitters, etc.
Page 237 XM antenna cable is attached securely. “ANTENNA” There is a short-circuit in the antenna or the sur- rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to the XM Satellite Radio. The radio is being updated with the latest ®...
Page 238 3-2. Using the audio system The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to “---” the previous channel or “CH001”. If it does not change automatically, select another channel. ® Contact the XM Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada).
Page 239: Using The Cd Player
3-2. Using the audio system Using the CD player Power Volume Playback CD slot CD eject CD insert (type B and C) Track selection Displaying Search text playback messages Fast-forward Random playback Reverse Repeat play CD selection (with a CD changer) Loading CDs Loading a CD Type A...
Page 240 3-2. Using the audio system Loading multiple CDs (type B and C) STEP Press and hold until you hear a beep. “WAIT” is shown on the display. STEP Insert a CD when the indicator on the slot turns from amber to green.
Page 241 3-2. Using the audio system Fast-forwarding and reversing tracks To fast-forward or reverse, press (reverse) or (fast-for- ward). Scanning tracks STEP Press The first ten seconds of each track will be played. STEP Press again when the desired track is reached. Selecting a CD (with a CD changer) To select a CD to play To select the desired CD, press...
Page 242 3-2. Using the audio system Random playback Current CD Press (RAND). Tracks are played in a random order until is pressed once more. All CDs (with a CD changer) Press and hold (RAND) until you hear a beep. Tracks on all loaded CDs are played in a random order until pressed once more.
Page 243 Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. Discs that can be used Discs with the marks shown below can be used.
Page 244 3-2. Using the audio system NOTICE CDs that cannot be used Do not use the following types of CDs or Dual Discs. Doing so may damage the CD player and/or the CD insert/eject function. Type A: CDs that have a diameter other than 4.7 in.
Page 245 3-2. Using the audio system NOTICE CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. Do not insert anything other than CDs into the CD slot. Do not apply oil to the CD player. Store CDs away from direct sunlight.
Page 246: Playing Back Mp3 And Wma Discs
3-2. Using the audio system Playing back MP3 and WMA discs Fast-forward Power Volume CD insert CD slot (type B and C) File selection CD eject Folder File selection selection Search Displaying text playback messages Playback Random playback Reverse Repeat play CD selection (with a CD changer) Loading and ejecting MP3 and WMA discs →P.
Page 247 3-2. Using the audio system Selecting and scanning a folder Selecting folders one at a time Press “∧” or “∨” on to select the desired folder. Selecting the desired folder by cueing the first file of each folder Press and hold until you hear a beep.
Page 248 3-2. Using the audio system Repeat play To repeat a file Press (RPT). To repeat all of the files in a folder Press and hold (RPT) until you hear a beep. Random playback To play files from a particular folder in random order Press (RAND).
Page 249 Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. “NO MUSIC”: This indicates that the MP3/WMA file is not included in the Discs that can be used →P.
Page 250 3-2. Using the audio system MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 251 3-2. Using the audio system Compatible disc formats The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2 CD-ROM XA Mode 2, Form 1 and Form 2 • File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet) MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
Page 252 3-2. Using the audio system Extensions If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
Page 253: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Displays the current mode Changes the following set- ting l Sound quality and vol- ume balance (→P. 260) The sound quality and bal- ance setting changed to produce the best sound.
Page 254 3-2. Using the audio system Using the audio control function Changing sound quality modes Pressing selects the mode to be changed in the following order. “BAS”→“MID”*→“TRE”→“FAD”→“BAL”→“ASL” *: Type C only Adjusting sound quality Turning adjusts the level. Mode Sound qual- Turn to the Turn to the Level...
Page 255 3-2. Using the audio system Adjusting the Automatic Sound Levelizer (ASL) Type A and B When “ASL” is selected, turning to the right changes the “ASL” level in the order of “LOW”, “MID” and “HIGH”. Turning to the left turns “ASL” off. ASL automatically adjusts the volume and tone quality according to vehi- cle speed.
Page 256: Using The Aux Adapter
3-2. Using the audio system Using the AUX adapter This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Open the cover and connect STEP the portable audio device. Press STEP Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls.
Page 257: Using The Steering Wheel Audio Switches
3-2. Using the audio system ∗ Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Volume Radio: Selects radio sta- tions CD: Selects tracks, files (MP3 and WMA) and discs Turns the power on, selects audio source Turning on the power...
Page 258 3-2. Using the audio system Adjusting the volume Press “+” on to increase the volume and “-” to decrease the vol- ume. Press and hold to continue increasing or decreasing the volume. Selecting a radio station STEP Press to select the radio mode. STEP Press “∧”...
Page 259 3-2. Using the audio system CAUTION To reduce the risk of an accident Exercise care when operating the audio switches on the steering wheel.
Page 260 3-3. Using the hands-free phone system (for cellular phone) ∗ Hands-free phone system (for cellular phone) features ® This system supports Bluetooth , which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.
Page 261 3-3. Using the hands-free phone system (for cellular phone) Required profiles for the cellular phone HFP (Hands Free Profile) Ver. 1.0 OPP (Object Push Profile) Ver. 1.1 ® If your cellular phone does not support HFP, the Bluetooth phone cannot be entered and OPP serviced cannot be provided separately.
Page 262 3-3. Using the hands-free phone system (for cellular phone) NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 263 3-3. Using the hands-free phone system (for cellular phone) CAUTION Caution while driving ® Do not use a cellular phone or connect the Bluetooth phone. NOTICE To prevent damage to a cellular phone Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.
Page 264 3-3. Using the hands-free phone system (for cellular phone) ∗ Using the hands-free phone system (for cellular phone) Audio unit Displays such items as messages, name, phone number Lower-case characters and special characters, such as an umlaut, cannot be dis- played.
Page 265 3-3. Using the hands-free phone system (for cellular phone) Steering wheel telephone switches Volume The voice guidance volume cannot be adjusted using this button. Hands-free phone system off/ends a call/refuses a call Hands-free phone system on/starts a call Press: Voice command sys- tem on Press and hold: Voice com- mand system off...
Page 266 3-3. Using the hands-free phone system (for cellular phone) Operating the system using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands- free phone system without checking the display or operating Operation procedure when using a voice command Press and say a command for a desired function.
Page 267 3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered.
Page 268 3-3. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system Normal operation Second First menu Third menu Operation detail menu Dialing a number stored in Callback the incoming call history memory Dialing a number stored in Redial the outgoing call history memory...
Page 269 3-3. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu Set PIN Setting a PIN code Phonebook Locking the phone book Security Lock Phonebook Unlocking the phone book Unlock Registering the cellular Pair Phone phone to be used Changing a registered name Change Name...
Page 270 3-3. Using the hands-free phone system (for cellular phone) Using a short cut key First menu Second menu Operation detail Dialing a number registered Dial “XXX (name)” in the phone book Phone book add Adding a new number entry Changing the name of a Phone book change phone number in the phone name...
Page 271 3-3. Using the hands-free phone system (for cellular phone) Automatic adjustment of volume When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. When using a voice command For numbers, say a combination of single digits from zero to nine, # (pound), ∗...
Page 272 3-3. Using the hands-free phone system (for cellular phone) Making a phone call Making a phone call l Dialing by inputting a number “Dial by number” l Dialing by inputting a name “Dial by name” l Speed dialing l Dialing a number stored in the outgoing history memory “Redial”...
Page 273 3-3. Using the hands-free phone system (for cellular phone) Dialing by inputting a number STEP Press and say “Dial by number”. STEP Press and say the phone number. STEP Dial by one of the following methods: a. Press b. Press and say “Dial”.
Page 274 3-3. Using the hands-free phone system (for cellular phone) Dialing by inputting a name STEP Press and say “Dial by name”. STEP Select a registered name to be input by either of the following methods: a. Press and say a registered name. b.
Page 275 3-3. Using the hands-free phone system (for cellular phone) When receiving a phone call Answering the phone Press Refusing the call Press Transferring a call A call can be transferred between the cellular phone and system while dialing or receiving a call, or during a call. Use one of the follow- ing methods: a.
Page 276 3-3. Using the hands-free phone system (for cellular phone) Using the call history memory Follow the procedure below to use a number stored in the call history memory: STEP Press and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory).
Page 277 3-3. Using the hands-free phone system (for cellular phone) Call history Up to 5 phone numbers can be stored in each of the outgoing and incoming call history memories. When talking on the phone Do not talk simultaneously with the other party. Keep the volume of the received voice down.
Page 278 3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: Functions and operation procedures To enter the menu for each function, follow the steps below using a voice command or l Registering a cellular phone...
Page 279 3-3. Using the hands-free phone system (for cellular phone) Selecting the cellular phone to be used STEP Select “Select Phone” using a voice command or Pattern A STEP Select the cellular phone to be used by either of the following methods, and select “Confirm”...
Page 280 3-3. Using the hands-free phone system (for cellular phone) b. Press and say “List phones”. While the desired phone name is being read aloud, press c. Select the desired phone name using STEP Press or select “Record Name” using , and say a new name.
Page 281 3-3. Using the hands-free phone system (for cellular phone) Deleting a cellular phone STEP Select “Delete” using a voice command or Pattern A STEP Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or a.
Page 282 3-3. Using the hands-free phone system (for cellular phone) Pattern B STEP Select a 4 to 8-digit number using The number should be input 1 digit at a time. STEP When the entire number to be registered as a passkey has been input, press once again.
Page 283 3-3. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: Security setting items and operation procedure l Setting or changing the PIN (Personal Identification Number) 1. “Setup” → 2. “Security” → 3. “Set PIN” l Locking the phone book 1.
Page 284 3-3. Using the hands-free phone system (for cellular phone) STEP Enter the registered PIN using a voice command or STEP Enter a new PIN using a voice command or When using , input the code 1 digit at a time. Locking or unlocking the phone book STEP Select “Phonebook lock (Phbk Lock)”...
Page 285 3-3. Using the hands-free phone system (for cellular phone) Initialization STEP Select “Initialize” and then “Confirm” using STEP Select “Confirm” using Initialization The following data in the system can be initialized: • Phone book • Outgoing and incoming call history •...
Page 286 3-3. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: l Adding a new phone number 1. “Phonebook” → 2. “Add Entry” l Setting speed dial 1.
Page 287 3-3. Using the hands-free phone system (for cellular phone) Adding procedure STEP Select “Add Entry” using a voice command or STEP Use one of the following methods to input a phone number: Inputting a phone number using a voice command STEP2-1:Select “By Voice”...
Page 288 3-3. Using the hands-free phone system (for cellular phone) Inputting a phone number using STEP2-1:Select “Manual Input” using STEP2-2:Input a phone number using Input the phone number 1 digit at a time. STEP2-3:When the entire number has been input, press once again.
Page 289 3-3. Using the hands-free phone system (for cellular phone) STEP Select the name to be registered by either of the following methods, and select “Confirm” using a voice command or a. Press and say the desired name. b. Select “Record Name” using , and say the desired name.
Page 290 3-3. Using the hands-free phone system (for cellular phone) b. Press , and say “List names”. While the desired name is being read aloud, press , and select “Con- firm” using a voice command or c. Select the desired data using STEP Select the desired preset button, and register the data into speed dial by either of the following methods:...
Page 291 3-3. Using the hands-free phone system (for cellular phone) b. Press , and say “List names”. While the desired name is being read aloud, press , and select “Con- firm” using a voice command or c. Select the desired name using STEP Press or select “Record Name”...
Page 292 3-3. Using the hands-free phone system (for cellular phone) b. Press , say “List phones”. While the name of the desired phone number is being read aloud, press Pattern B STEP Select the data to be deleted using Deleting speed dials STEP Select “Delete Speed Dial (Del Spd Dial)”...
Page 293 3-3. Using the hands-free phone system (for cellular phone) Limitation of number of digits A phone number that exceeds 24 digits cannot be registered.
Page 294 3-4. Using the interior lights Interior lights list Your Toyota is equipped with the illuminated entry system to assist in entering the vehicle. Owing to the function of the system, the lights shown in the following illustration (except the luggage com-...
Page 295 3-4. Using the interior lights Personal/interior light main switch and personal/interior lights Personal/interior light main switch Type A Door position The personal lights and interior light come on when a door is opened. They go off when the doors are closed. The personal lights and interior light can be individually turned on or off.
Page 296 3-4. Using the interior lights Personal/interior lights and interior light and luggage compartment light Type B On/off Interior light Door position Luggage compartment light...
Page 297 20 minutes. Customization that can be configured at Toyota dealer Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features →P. 488)
Page 298 3-5. Using the storage features List of storage features Cup holders Bottle holders Auxiliary box Glove box Overhead console Console box...
Page 299 3-5. Using the storage features Glove box Glove box Unlock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Lock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Open (pull lever)
Page 300 3-5. Using the storage features Console box Console box Upper tray Lift the lid. Lower box Pull the lever up and lift the lid. CAUTION Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 301 3-5. Using the storage features Overhead console Overhead console The overhead console is useful for temporarily storing sunglasses and similar small items. Press in the lid. CAUTION Items that should not be left in the overhead console Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked.
Page 302 3-5. Using the storage features Cup holders Cup holders Type A Removing the adapters changes the size. (→P. 308) Type B To use the cup holders, pull the strap forward and fold down the center seatback. Adjusting size of the cup holders (type A only) Remove the adapters.
Page 303 3-5. Using the storage features Cup holders and bottle holders CAUTION Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 304 3-5. Using the storage features Bottle holders Third seat CAUTION Items unsuitable for the bottle holder Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 305 3-5. Using the storage features Auxiliary box Auxiliary box To open and close the auxiliary box, press the button. CAUTION Caution while driving Keep the auxiliary box closed. Injuries may result in the event of an accident or sudden braking. NOTICE Operating the auxiliary box If it is difficult to open or close the auxiliary box on a steep hill, move the...
Page 306 3-6. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender: Place in side position then slide backwards.
Page 307 3-6. Other interior features Vanity mirrors Slide the cover. The light turns on when the cover is opened.
Page 308 3-6. Other interior features Clock Vehicles with a manual air conditioning system Adjusts the hours. Adjusts the minutes. Rounds nearest hour.* *: e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00 Vehicles with an automatic air conditioning system Adjusts the hours.
Page 309 3-6. Other interior features Power outlets The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A. 120 VAC: Accessories that use less than 100 W. 12 V Type A Type B Type C...
Page 310 3-6. Other interior features 120 VAC (if equipped) Main switch To use the power outlet, turn on the main switch. Power outlet socket The power outlet can be used when Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with smart key system The “ENGINE START STOP”...
Page 311 3-6. Other interior features NOTICE To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. To prevent the fuse from being blown Do not use an accessory that uses more than 12 V 10 A.
Page 312 3-6. Other interior features ∗ Seat heaters Heats the driver’s seat Heats the front passenger’s seat The indicator light is on while the seat heater is operating. Push the switch once again to turn off the seat heater. The seat heaters can be used when Vehicles without smart key system The engine switch is in the “ON”...
Page 313 3-6. Other interior features NOTICE To prevent seat heater damage Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat. To prevent battery discharge Turn the switches off when the engine is not running.
Page 314 3-6. Other interior features Armrest To use the armrest, pull the strap forward and fold down the center seatback. NOTICE To prevent damage to the armrest Do not place too much strain on the armrest.
Page 315 3-6. Other interior features Coat hooks CAUTION Items that must not be hung on the hook (vehicles with SRS curtain shield airbags) Do not hang a coat hanger or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles that cause death or serious injury.
Page 316 When installing the driver's floor mat Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. Only use floor mats designed for the driver's seat. Always install the floor mat securely using the retaining hooks (clips) pro- vided.
Page 317 3-6. Other interior features Luggage compartment features Cargo hooks Cargo hooks are provided for securing loose items. Grocery bag hooks Storage box (vehicles without third seats) Type A The rear deck board can be folded up into two positions. Lift the rear deck board. STEP...
Page 318 3-6. Other interior features Fold up the deck board. STEP The lid can be removed. Type B Lift the front deck board.
Page 319 3-6. Other interior features Luggage cover (if equipped) Attach the hooks to the head STEP restraints. If necessary, move the second seats to enable the hook engagement. Pull out the luggage cover and STEP hook onto the anchors. Removing the luggage cover (if equipped) The luggage cover can be removed by following the procedure below.
Page 320 3-6. Other interior features Stowing the luggage cover (if equipped) Open the rear deck board and STEP remove the deck side cover. Insert the right end of the lug- STEP gage cover into the recess, then compress the left end of the lug- gage cover and insert it into the recess.
Page 321 3-6. Other interior features CAUTION When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their stowed positions. Caution while driving Do not drive with any of the deck boards opened. Items may fall out and cause injury.
Page 322 3-6. Other interior features...
Page 323 4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. l Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 324 4-1. Maintenance and care Aluminum wheels Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. Do not use detergent on the wheels when they are hot, for example after driving for long distance in the hot weather.
Page 325 4-1. Maintenance and care NOTICE To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.) Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 326 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 327 4-1. Maintenance and care Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 328 4-1. Maintenance and care NOTICE Cleaning detergents Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. Do not use polish wax or polish cleaner.
Page 329 It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 330 4-2. Maintenance Allow inspection and repairs to be performed by a Toyota dealer Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 331 “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items...
Page 332 4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? •...
Page 333 4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? • Is there any leakage after park- Fluid leaks ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? Tires •...
Page 334 The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test:...
Page 335 Brake fluid level (→P. 358) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 336 4-3. Do-it-yourself maintenance Items Parts and tools • Fuse with same amperage rating Fuses (→P. 384) as original Radiator and condenser ⎯ (→P. 358) • Tire pressure gauge Tire inflation pressure (→P. 372) • Compressed air source • Water washer fluid containing Washer fluid (→P.
Page 337 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. When working on the engine compartment Keep hands, clothing, and tools away from the moving fans and engine drive belt.
Page 338 4-3. Do-it-yourself maintenance NOTICE If you remove the air cleaner filter Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air. Also a backfire could cause a fire in the engine compart- ment.
Page 339 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the auxiliary catch lever STEP and lift the hood. Hold the hood open by insert- STEP ing the supporting rod into the slot.
Page 340 4-3. Do-it-yourself maintenance CAUTION Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. After installing the support rod into the slot Make sure the rod supports the hood securely from falling down on to your head or body.
Page 341 4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front Rear...
Page 342 4-3. Do-it-yourself maintenance CAUTION When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri- ous injury. Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 343 4-3. Do-it-yourself maintenance Engine compartment 2.5 L 4-cylinder (2AR-FE) engine Fuse boxes (→P. 384) Radiator (→P. 358) Engine coolant reservoir Condenser (→P. 358) (→P. 357) Electric cooling fans Engine oil filler cap Engine oil level dipstick (→P. 354) (→P. 353) Battery (→P.
Page 344 4-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FE) engine Fuse boxes (→P. 384) Radiator (→P. 358) Engine coolant reservoir Condenser (→P. 358) (→P. 357) Electric cooling fans Engine oil filler cap Engine oil level dipstick (→P. 354) (→P. 353) Battery (→P. 360) Washer fluid tank (→P.
Page 345 4-3. Do-it-yourself maintenance Engine compartment cover Removing the engine compartment cover Installing the clips...
Page 346 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil STEP Park the vehicle on level ground. After turning off the engine, wait more than five minutes for the oil to drain back into the bottom of the engine.
Page 347 4-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FE) engine Full Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 348 1000 km) If your vehicle consumes more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600 miles (1000 km), contact your Toyota dealer. Changing the engine oil (U.S.A. only) To reset the oil change system, follow the procedure below:...
Page 349 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 350 If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, engine coolant reservoir cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. Coolant selection Only use “Toyota Super Long Life Coolant”...
Page 351 Check the radiator and condenser, and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION When the engine is hot Do not touch the radiator or condenser as they may be hot and may cause burns.
Page 352 4-3. Do-it-yourself maintenance Adding fluid Fluid type SAE J1703 or FMVSS No.116 DOT 3 brake fluid Items Clean funnel Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking effi- ciency.
Page 353 Checking battery condition (vehicles with the battery indica- tor) Check the battery condition using the indicator color. Type A Blue: Good condition White: Charging is necessary. Have the vehicle inspected by your Toyota dealer. Red: Not working properly. Have the battery checked by your Toyota dealer.
Page 354 4-3. Do-it-yourself maintenance Type B Green: Good condition Dark: Charging is necessary. Have the vehicle inspected by your Toyota dealer. Clear or light yellow: Not working properly. Have the vehicle checked your Toyota dealer. Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive.
Page 355 4-3. Do-it-yourself maintenance CAUTION Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: Do not cause sparks by touching the battery terminals with tools.
Page 356 4-3. Do-it-yourself maintenance CAUTION Emergency measures regarding electrolyte If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention. If possible, continue to apply water with a sponge or cloth while traveling to the nearest medical facility.
Page 357 4-3. Do-it-yourself maintenance Washer fluid For vehicles sold in U.S.A. Add washer fluid in the following situations. l Any washer does not work. l The low washer fluid warning light comes on. For vehicles sold in Canada If any washer does not work or the low windshield washer fluid warn- ing light comes on, the washer tank may be empty.
Page 358 Vehicles with a spare tire of the same wheel type as the installed tires Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection.
Page 359 The tire pressure warning system (if equipped) Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 421)
Page 360 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (→P. 367) Registering ID codes The tire pressure warning valve and transmitter is equipped with a unique ID code.
Page 361 A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage. If you are not sure, consult with your Toyota dealer. Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 362 4-3. Do-it-yourself maintenance Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 363 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Toyota. Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 364 When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. When replacing tire valve caps, do not use tire valve caps other than those specified.
Page 365 4-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 477)
Page 366 4-3. Do-it-yourself maintenance Inspection and adjustment procedure Tire valve Tire pressure gauge STEP Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the graduations of the gauge. STEP If the tire inflation pressure is not within the recommended levels, adjust the pressure.
Page 367 Reduced driving comfort and tire life Reduced safety Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 368 4-3. Do-it-yourself maintenance CAUTION Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. Excessive wear Uneven wear Poor handling Possibility of blowouts resulting from overheated tires Poor sealing of the tire bead Wheel deformation and/or tire separation A greater possibility of tire damage from road hazards...
Page 369 Used wheels l Bent wheels that have been straightened Aluminum wheel precautions l Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. l When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 370 When replacing wheels (vehicles with a tire pressure warning sys- tem) The wheels of your Toyota are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure.
Page 371 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method STEP Vehicles without smart key system: Turn the engine switch off. Vehicles with smart key system: Turn the “ENGINE START STOP”...
Page 372 4-3. Do-it-yourself maintenance Replacement method Remove the air conditioning filter and replace it with a new one. The “UP↑” marks shown on the filter should be pointing up. Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule.
Page 373 4-3. Do-it-yourself maintenance Key battery Replace the battery with a new one if it is discharged. You will need the following items: l Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with a rag.) l Small Phillips-head screwdriver l Lithium battery CR2016 (vehicles without smart key system) or CR1632 (vehicles with smart key system)
Page 374 4-3. Do-it-yourself maintenance Open the case cover using a STEP coin protected with tape etc. and remove the depleted bat- tery. Insert a new battery with the “+” terminal facing up. Replacing the battery (vehicles with smart key system) Take out the mechanical key. STEP Remove the cover.
Page 375 Use a CR2016 (vehicles without smart key system) or CR1632 (vehicles with smart key system) lithium battery Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. Replace only with the same or equivalent type recommended by your Toyota dealer.
Page 376 4-3. Do-it-yourself maintenance NOTICE For normal operation after replacing the battery Observe the following precautions to prevent accidents. Always work with dry hands. Moisture may cause the battery to rust. Do not touch or move any other components inside the remote control. Do not bend either of the battery terminals.
Page 377 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Vehicles without smart key system: Turn the engine switch off.
Page 378 4-3. Do-it-yourself maintenance Under the instrument panel Remove the lid. STEP After a system failure, see “Fuse layout and amperage rat- ings” (→P. 388) for details about which fuse to check. Remove the fuse with the pull- STEP out tool. STEP Check if the fuse has blown.
Page 379 Type B Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Contact your Toyota dealer.
Page 380 4-3. Do-it-yourself maintenance Type D Normal fuse Blown fuse Contact your Toyota dealer. Type E Normal fuse Blown fuse Contact your Toyota dealer.
Page 381 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings Engine compartment Type A (passenger’s side) Fuse Ampere Circuit SPARE 30 A Spare fuse SPARE 20 A Spare fuse SPARE 10 A Spare fuse Air conditioning system, power win- ECU-B2 7.5 A dows, smart key system ALT-S 7.5 A...
Page 382 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Gauges and meters, clock, main body ECU, wireless remote control, smart key system, audio system, front passenger occupant classifi- ECU-B 10 A cation system, ABS, TRAC, Enhanced VSC, AUTO LSD, down- hill assist control system, hill-start assist control system, Active torque control 4WD system Vanity lights, personal/interior...
Page 383 4-3. Do-it-yourself maintenance Fuse Ampere Circuit CDS* 30 A Electric cooling fan FAN 1* 50 A H-LP CLN 30 A No circuit : Vehicles with towing package : Vehicles with 2.5 L 4-cylinder (2AR-FE) engine : Vehicles with 3.5 L V6 (2GR-FE) engine Type B (driver’s side) Fuse Ampere...
Page 384 4-3. Do-it-yourself maintenance Fuse Ampere Circuit AM2-2 7.5 A Starting system Multiport fuel injection system/ EFI NO.1 10 A sequential multiport fuel injection system Multiport fuel injection system/ EFI NO.2 10 A sequential multiport fuel injection system EFI NO.3 7.5 A No circuit GROW 80 A...
Page 385 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 20 A A/F sensor, fuel pump : Vehicles without towing package : Vehicles with towing package : Vehicles with 2.5 L 4-cylinder (2AR-FE) engine : Vehicles with 3.5 L V6 (2GR-FE) engine Under the instrument panel Fuse Ampere Circuit...
Page 386 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Audio system, power outlets, power rear view mirror control, 7.5 A automatic transmission shift lock system, main body ECU, clock, smart key system MIR HTR 10 A Outside rear view mirror defoggers PWR OUTLET 15 A Power outlet RR FOG...
Page 387 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 7.5 A On-board diagnosis system Stop/tail lights, high mounted stop- light, automatic transmission shift lock system, multiport fuel injection system/sequential multiport fuel STOP 10 A injection system, ABS, TRAC, Enhanced VSC, AUTO LSD sys- tem, downhill assist control system, hill-start assist control system Main body ECU, power door lock...
Page 388 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix.
Page 389 You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 390 4-3. Do-it-yourself maintenance Rear bulb locations Vehicles without a spare tire Rear side marker lights License plate Rear turn signal and back-up lights lights Vehicles with a spare tire Rear side marker lights License plate light Rear turn signal and back-up lights...
Page 391 4-3. Do-it-yourself maintenance Replacing light bulbs Headlights Right side only: Remove the clip STEP and move it aside to allow easy access to the light bulbs. Turn the bulb base counterclock- STEP wise. Headlight (low beam) Headlight (high beam) Unplug connector while STEP...
Page 392 4-3. Do-it-yourself maintenance Reinstalling the clip Front turn signal, parking and front side marker lights Right side only: Remove the clip STEP and move it aside to allow easy access to the light bulbs. Turn the bulb base counterclock- STEP wise.
Page 393 4-3. Do-it-yourself maintenance Reinstalling the clip Front fog lights (if equipped) Turn the steering wheel in the STEP opposite direction of the front fog light that you wish to replace. For example, if you wish to replace the front fog light on the right side, turn the steering wheel to the left.
Page 394 4-3. Do-it-yourself maintenance Unplug connector while STEP depressing the lock release. Turn the bulb base counterclock- STEP wise. Back-up lights, rear turn signal and rear side marker lights Open the back door (→P. 46) STEP and remove the cover. Turn the bulb base counterclock- STEP wise.
Page 395 4-3. Do-it-yourself maintenance Remove the light bulb. STEP Rear side marker light Rear turn signal light Back-up light License plate lights Vehicles without a spare tire Remove the cover as shown in STEP the illustration. Turn the bulb base counterclock- STEP wise.
Page 396 Remove the light bulb. STEP Light other than the above If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. l High mounted stoplight l Stop/tail lights l Side turn signal lights (if equipped)
Page 397 4-3. Do-it-yourself maintenance Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Large drops of water are built up on the inside of the lens.
Page 398 5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE To prevent battery discharge Do not leave the emergency flashers on longer than necessary when the engine is not running.
Page 399 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a wheel-lift type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 400 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet. This should only be attempted on hard surfaced roads for short distances at low speeds.
Page 401 5-1. Essential information Installing towing eyelet Remove the eyelet cover using a STEP flathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body, as shown in the illustration. Insert the towing eyelet into the STEP hole and tighten partially by hand.
Page 402 5-1. Essential information Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front (2WD models) Release the parking brake. From the front (4WD models) Use a towing dolly under the rear wheels.
Page 403 5-1. Essential information From the rear Use a towing dolly under the front wheels. Using a flat bed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged.
Page 404 5-1. Essential information CAUTION Caution while towing Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelet and the cables or chains. Always use caution for the surroundings and other vehicles while towing. If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult.
Page 405 5-1. Essential information NOTICE To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear. To prevent causing serious damage to the transmission and active torque control 4WD system (4WD models) when towing using a wheel- lift type truck 2WD models: Never tow this vehicle from the rear with the front wheels on the...
Page 406 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms l Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 407 5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 408 5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event.
Page 409 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: l An agreement from the vehicle's owner (or the leasing company for a leased vehicle) is obtained...
Page 410 Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* •...
Page 411 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: (U.S.A.)
Page 412 5-2. Steps to take in an emergency Warning light Warning light/Details “ABS” warning light (U.S.A.) Indicates a malfunction in: • The ABS; • The brake assist system. (Canada) Electric power steering warning light Indicates a malfunction in the EPS (Electric Power Steering) system.
Page 413 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light Check that all doors are Indicates that a door is not closed.
Page 414 (if equipped) lever to P. Indicates that the auto- If the light does not go off, matic transmission fluid contact your Toyota dealer. temperature is too high. Low washer fluid warning light Fill the tank. Low level of washer fluid...
Page 415 5-2. Steps to take in an emergency *: Driver's and front passenger’s seat belt warning buzzers: The driver’s and front passenger’s seat belt warning buzzers sound to alert the driver and front passenger that his or her seat belt is not fastened. The buzzer sounds intermittently for 10 seconds after the vehicle has reached a speed of 12 mph (20 km/h).
Page 416 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart key system warning Turn the light “ENGINE Indicates that the driver’s door START has been opened and closed STOP” switch with the shift lever in P, the 3 times OFF or con- Once...
Page 417 The malfunction indicator lamp will go off after taking several driving trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible. Front passenger detection sensor and passenger seat belt reminder...
Page 418 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.)
Page 419 If the tire pressure warning light comes on after flashing for 1 minute fre- quently when the “ENGINE START STOP” switch or the engine switch is turned ON, have it checked by your Toyota dealer. Customization that can be configured at Toyota dealer The vehicle speed linked seat belt reminder buzzer can be disabled.
Page 420 5-2. Steps to take in an emergency CAUTION Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 421 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light).
Page 422 5-2. Steps to take in an emergency If you have a flat tire (vehicles with standard tires) Remove the flat tire and replace it with the spare provided. Before jacking up the vehicle l Stop the vehicle on a hard, flat surface. l Set the parking brake.
Page 423 5-2. Steps to take in an emergency Taking out the jack Disengage claws STEP remove the cover. Loosen STEP Tighten Loosen and take out the jack.
Page 424 5-2. Steps to take in an emergency Taking out the tool bag Disengage claws STEP remove the cover. Take out the tool bag. STEP...
Page 425 5-2. Steps to take in an emergency Taking out the spare tire (vehicles with the spare tire cover) Open the back door. Unlock the STEP latch handle which is on the bot- tom of the spare tire cover. STEP Close the back door. Remove the spare tire cover by STEP holding the bottom and lifting it...
Page 426 5-2. Steps to take in an emergency Taking out the spare tire (vehicles without the spare tire cover) Using the wheel nut wrench, STEP loosen the hold-down nuts by turning them counterclockwise until they can be loosened by hand. Follow the order shown in the illustration.
Page 427 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP Wheel Flat tire chock posi- tions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of...
Page 428 5-2. Steps to take in an emergency 17-inch and 18-inch wheels Slightly loosen the wheel nuts STEP (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. On some models: Assemble the STEP jack handle extension.
Page 429 5-2. Steps to take in an emergency STEP Raise the vehicle until the tire is slightly raised off the ground. Type A Type B Remove all the wheel nuts and STEP the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
Page 430 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 431 5-2. Steps to take in an emergency Replacing an aluminum wheel with an aluminum wheel Turn the nut washers until they Disc wheel come into contact with the disc wheel. Washer STEP Lower the vehicle. Type A Type B...
Page 432 5-2. Steps to take in an emergency Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) STEP Reinstall the wheel ornament. 16-inch wheel 17-inch and 18-inch wheels...
Page 433 5-2. Steps to take in an emergency Stowing the flat tire STEP Remove any dirt or foreign matter from the disc wheel seat and the wheel contact surface. Vehicles with aluminum wheels STEP and a steel wheel for the spare: Remove the plastic rings from the wheel nuts of the spare tire carrier.
Page 434 5-2. Steps to take in an emergency Upper slots STEP Hooks To install the spare tire cover, insert the hooks under the guides to the upper slots and lower the cover. Attach the cover by hooking the STEP 2 inner protrusions. Check that the cover is securely attached.
Page 435 5-2. Steps to take in an emergency STEP Stow the jack and all tools securely, and replace all the cov- ers. When reinstalling the wheel ornament (vehicles with 16-inch wheels) Align the cutout of the wheel ornament with the valve stem as shown. After completing the tire change (vehicles with a tire pressure warning system) The tire pressure warning system must be reset.
Page 436 5-2. Steps to take in an emergency CAUTION Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 437 5-2. Steps to take in an emergency CAUTION Replacing a flat tire Observe the following precautions to reduce the risk of death or serious injury: Do not try to remove the ornament by hand. Take due care in handling the ornament to avoid unexpected personal injury. Never use oil or grease on the wheel bolts or wheel nuts.
Page 438 When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. To avoid damaging the tire pressure warning valves and transmit- ters (vehicles with a tire pressure warning system) Do not use liquid sealants on flat tires.
Page 439 5-2. Steps to take in an emergency If you have a flat tire (vehicles with run-flat tires) Take your vehicle to the nearest Toyota dealer or authorized tire dealer as soon as possible. Run-flat tires (A “RFT” or “DSST” mark is molded on the...
Page 440 The battery may be discharged. (→P. 453) l There may be a malfunction in the steering lock system (vehi- cles with smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
Page 441 (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 442 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate.
Page 443 Changing “ENGINE START STOP” switch modes and starting the engine STEP Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side of STEP electronic “ENGINE START STOP” switch. If any of the doors is opened and...
Page 444 5 seconds after the buzzer sounds, keeping the brake pedal depressed. In the event that the “ENGINE START STOP” switch still cannot be operated, contact your Toyota dealer. Stopping the engine Shift the shift lever to P and press the “ENGINE START STOP” switch as you normally do when stopping the engine.
Page 445 You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. STEP...
Page 446 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible. Starting the engine when the battery is discharged The engine cannot be started by push-starting.
Page 447 5-2. Steps to take in an emergency CAUTION Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery. Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended termi- nal.
Page 448 Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fans are not operating: Stop the engine and call your Toyota dealer. After the engine has cooled STEP STEP...
Page 449 5-2. Steps to take in an emergency Have the vehicle checked at the nearest Toyota dealer as soon as possible. Overheating If you observe the following, your vehicle may be overheating. The engine coolant temperature gauge enters the red zone or a loss of power is experienced.
Page 450 5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP Stop the engine. Set the parking brake and put the shift lever in P.
Page 451 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: STEP Steadily step on the brake pedal with both feet and firmly...
Page 452 5-2. Steps to take in an emergency Vehicles with a smart key sys- tem: Stop the engine by press- ing and holding the “ENGINE START STOP” switch for 3 consecutive seconds or more. Press and hold for 3 seconds or more STEP Stop the vehicle in a safe place by the road.
Page 453 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights 178.7 in. (4540 mm)* 180.7 in. (4590 mm)* Overall length 180.9 in. (4595 mm)* 181.1 in. (4600 mm)* 181.9 in. (4620 mm)* Without over fender 71.5 in. (1815 mm) Overall width With over fender 73.0 in.
Page 454 6-1. Specifications 2.5 L 4-cylinder (2AR-FE) engine 1500 lb. (680 kg) Towing capacity 3.5 L V6 (2GR-FE) engine (Trailer weight + cargo) 2000 lb. (905 kg) 3500 lb. (1585 kg)* : Without spare tire : 215/70R16 tires : 225/65R17 tires : 235/55R18 tires : With spare tire cover : Unladen vehicle...
Page 455 Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 456 6-1. Specifications Engine number The engine number is stamped on the engine block as shown. 2.5 L 4-cylinder (2AR-FE) engine 3.5 L V6 (2GR-FE) engine Engine Model 2AR-FE 2GR-FE 4-cylinder in line, 6-cylinder V type, Type 4-cycle, gasoline 4-cycle, gasoline 3.54 ×...
Page 457 3.5 L V6 (2GR-FE) engine 6.4 qt. (6.1 L, 5.4 Imp. qt.) Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity.
Page 458 6-1. Specifications Recommended viscosity: 2.5 L 4-cylinder (2AR-FE) engine SAE 5W-20 or 0W-20 SAE 5W-20 or 0W-20 engine oil may be used. However, SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. Outside temperature The 0W portion of the oil viscosity rating indicates the characteristic of the oil which allows cold startability.
Page 459 3.5 L V6 (2GR-FE) engine 9.4 qt. (8.9 L, 7.8 Imp. qt.) 9.8 qt. (9.3 L, 8.2 Imp. qt.)* Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and...
Page 460 6-1. Specifications Ignition system Spark plug Make 2.5 L 4-cylinder (2AR-FE) engine DENSO, SK16HR11 3.5 L V6 (2GR-FE) engine DENSO FK20HR11 0.043 in. (1.1 mm) NOTICE Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust gap when tuning the engine.
Page 461 Toyota Genuine ATF WS NOTICE Automatic transmission fluid type Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmis- sion of your vehicle.
Page 462 6-1. Specifications Brakes Pedal clearance* Without third seats 3.7 in. (95 mm) With third seats 4.7 in. (120 mm) 0.04 ⎯ 0.24 in. (1 ⎯ 6 mm) Pedal free play Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in.
Page 463 6-1. Specifications Tires and wheels Type A 215/70R16 99H, 225/65R17 101H, Tire size 235/55R18 99H Tire inflation pressure Front: 32 psi (220 kPa, 2.2 kgf/cm or bar) (Recommended cold tire Rear: 32 psi (220 kPa, 2.2 kgf/cm or bar) inflation pressure) Spare: 32 psi (220 kPa, 2.2 kgf/cm or bar) 16 ×...
Page 464 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights High beam 9005 Low beam 9006 ⎯ Front fog lights* Front turn signal/parking, front 7443 21/5 Exterior side marker lights ⎯ Rear side marker lights Rear turn signal lights 7440 Back-up lights License plate lights ⎯...
Page 465 ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. If your engine knocks Consult your Toyota dealer.
Page 466 Toyota allows the use of oxygenate blended gasoline where the oxygen- ate content is up to 10% ethanol or 15% MTBE. If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87.
Page 467 6-1. Specifications NOTICE Notice on fuel quality Do not use improper fuels. If improper fuels are used the engine will be damaged. Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle's three-way catalytic converters causing the emission control system to malfunction and the emission control system to function improperly.
Page 468 6-1. Specifications Tire information Typical tire symbols Tire size (→P. 479) DOT and Tire Identification Number (TIN) (→P. 478) Uniform tire quality grading For details, see “Uniform tire quality grading” that follows. Location of treadwear indicators (→P. 365) Run-flat tire (RFT) or standard tire (→P.
Page 469 6-1. Specifications Load limit at maximum cold tire inflation pressure (→P. 368) Maximum cold tire inflation pressure (→P. 472) This means the pressure to which a tire may be inflated. Summer tire or all season tire (→P. 369) An all season tire has “M+S” on the sidewall. A tire not marked “M+S”...
Page 470 6-1. Specifications Tire size Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
Page 471 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 472 6-1. Specifications Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100.
Page 473 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure.
Page 474 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 475 6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 476 6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same Intended outboard molding on the other sidewall of the tire, or sidewall...
Page 477 6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load...
Page 478 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indicators designed to give a visual indication of the...
Page 479 Your vehicle includes a variety of electronic features that can be personalized to your preferences. Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer. Customized Item Function Default setting...
Page 480 6-2. Customization Customized Item Function Default setting setting Wireless Operation signal remote con- (Buzzer) trol → P. 38) Panic function Driver's door Door lock unlocked in one All doors → P. 42, Unlocking using a key step, all doors unlocked in one 451) unlocked in two step...
Page 481 6-2. Customization Customized Item Function Default setting setting Seat belt Vehicle speed linked reminder seat belt reminder → P. 421) buzzer...
Page 482 6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference After reconnecting or changing the Power window P.
Page 483 6-3. Initialization...
Page 484 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 485 Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 486 ATTENTION ■ Lorsque vous utilisez la ceinture de sécurité du siège central de la deuxième rangée N'utilisez pas la ceinture de sécurité du siège central de deuxième rangée si l'une des 2 boucles est déverrouillée. Si une seule des boucles est verrouillée, ceci peut entraîner des blessures graves, voire mortelles en cas de freinage brusque ou de collision.
Page 487 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2 Wheel Drive 4 Wheel Drive Air Conditioning Anti-lock Brake System Accessory Automatic Locking Retractor AUTO LSD Automatic Limited Slip Differential Average Child Restraint System Downhill Assist Control DISP Display Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering GAWR...
Page 488 Abbreviation list ABBREVIATIONS MEANING TPMS Tire Pressure Warning System TRAC Traction control Vehicle Identification Number Vehicle Stability Control...
Page 489 Alphabetical index Alphabetical index A/C........220, 225 Audio system ABS ...........180 Antenna......... 242 Active head restraints ....53 Audio input ......262 Air conditioning filter....378 AUX adapter ......262 Air conditioning system CD player/changer ....245 Air conditioning filter....378 MP3/WMA disc ..... 252 Automatic air Optimal use......
Page 490 Alphabetical index Care Power window lock switch..81 Exterior ......... 330 Power window precautions ..83 Interior ........333 Removed key battery Seat belts ......334 precautions ......382 Cargo capacity ......204 Seat belt extender Cargo hooks ......323 precautions ......75 CD changer ......245 Seat belt precautions ....73 CD player .........
Page 491 Alphabetical index Doors Engine Door glasses ......81 Compartment ......350 Door lock .....26, 38, 42 Engine switch....143, 147 Side mirrors......79 Hood ........346 Downhill assist control How to start the system ........189 engine......143, 147 Driver's seat belt reminder Identification number.....
Page 492 Alphabetical index Fog lights Gas station information ..512 Replacing light bulbs .... 396 Information ......474 Switch........168 Refueling .........88 Wattage ........ 473 Type ........466 Front fog lights Fuel door........88 Replacing light bulbs .... 396 Fuel filler door ......88 Switch........168 Fuel pump shut off system ..415 Wattage ........
Page 493 Alphabetical index I/M test........341 Key number......24 Identification Keyless entry ......38 Engine ........464 Keys ........24 Vehicle ........464 Mechanical key .......24 Ignition switch....144, 147 Wireless remote control Illuminated entry system..300 key ........38 Indicator lights ......159 Initialization License plate lights Items to initialize....491 Replacing light bulbs.....
Page 494 Alphabetical index Maintenance Outside rear view mirrors Do-it-yourself Adjusting and folding....79 maintenance ...... 342 Outside temperature General maintenance ... 338 display ........163 Maintenance data....462 Overhead console....307 Maintenance requirements... 336 Overheating, Engine ....456 Manual air conditioning system ........220 Parking brake ......154 Meter Parking lights Instrument panel light...
Page 495 Alphabetical index Radiator ........358 Seat heaters ......318 Radio .........239 Seating capacity ...... 204 Rear seat Seats Adjustment ......54 Adjustment ......49, 54 Folding down second Adjustment precaution ..53, 62 seatback .......57 Child seats/child restraint Folding down third system installation ....121 seatback .......59 Cleaning........
Page 496 Alphabetical index Stop lights Tire information Replacing light bulbs .... 396 Glossary ........482 Wattage ........ 473 Size ........479 Storage feature......304 Tire identification number..478 Storage precautions ....201 Uniform tire quality Stuck grading........480 If your vehicle becomes Tires stuck........458 Chains ........206 Sun visors........
Page 497 Alphabetical index Utility vehicle precautions ..193 Washer Checking ....... 364 Preparing and checking Valet key ........24 before winter....... 206 Vanity lights Switch ......169, 171 Vanity lights......313 Washing and waxing ....330 Wattage.........473 Weight Vanity mirrors......313 Cargo capacity ...... 198 Vehicle identification Load limits......
Page 498: Side Doors P
What to do if... What to do if... If you have a flat tire A tire punctures P. 430 P. 448 If the engine will not start The engine does not start P. 92 Engine immobilizer system P. 453 If the battery is discharged If the shift lever cannot be shifted The shift lever cannot be P.
Page 499 What to do if... nWarning lights Brake system warning Electric power steering light warning light P. 419 Active torque control 4WD sys- tem warning light P. 418 P. 419 Low fuel level warning Charging system warn- light ing light P. 419 P.
Page 500 What to do if... “ABS” warning light Tire pressure warning light P. 421 Smart key system warn- ing light P. 419 P. 423 Slip indicator light Cruise control indicator light* P. 419 P. 419 : The light flashes to indicate a malfunction.
Page 501: Fuel Filler Door P
Cold tire inflation P. 472 pressure Engine oil capacity Drain and refill P. 466 (Reference) Toyota Genuine Motor Oil or equivalent Oil grade: P. 466 ILSAC multigrade engine oil Engine oil type Recommended oil viscosity: SAE 5W-20 or 0W-20 (2.5 L 4-cylinder [2AR-FE] engine) SAE 5W-30 (3.5 L V6...

Toyota Rav 2010 Owner's Manual

Quick Links

Related Manuals for Toyota Rav 2010

Summary of Contents for Toyota Rav 2010

Table of Contents