Toyota RAV4 2010 Quick Reference Manual page 474

5-2. Steps to take in an emergency
STEP 4
Maintain the engine speed of the second vehicle, and turn
the engine switch to the "ON" position (vehicles without
smart key system) or turn the "ENGINE START STOP"
switch to IGNITION ON mode (vehicles with smart key sys-
tem), to start the vehicle's engine.
STEP 5
Once the vehicle's engine has started, remove the jumper
cables in the exact reverse order in which they were con-
nected.
Once the engine starts, have the vehicle checked at your Toyota
dealer as soon as possible.
■
Starting the engine when the battery is discharged
The engine cannot be started by push-starting.
■
To prevent battery discharge
●
Turn off the headlights and the audio system while the engine is turned
off.
●
Turn off any unnecessary electrical components when the vehicle is run-
ning at a low speed for an extended period, such as in heavy traffic, etc.
454
I n f o r ma t i o n P r o v i d e d b y :