Aastra 6755i User Manual page 162
Release 3.2.2 service pack 3 hot fix 1
Hide thumbs
Also See for 6755i:
- User manual (280 pages) ,
- Installation manual (33 pages) ,
- Quick reference manual (15 pages)
Table of Contents
Advertisement
Managing Calls
Configuring CFWD Using the Aastra Web UI
Aastra Web UI
Use the following procedure to configure CFWD using the Aastra Web UI.
Note:
(Optional) You can configure a Call Forward key on your phone to access the Call Forward menus if desired. If you do
not configure a Call Forward key, you can still access the Call Forward menu from the IP Phone UI at the path, Options-
>Call Forward.
1.
(optional) Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module.
Softkeys
2.
Select from "Key 1" through "Key 20".
3.
In the "Type" field, select Call Forward from the list of options.
4.
(optional) If required, enable or disable the applicable states for the Call Forward key (Idle, Connected, Incoming,
Outgoing, and/or Busy).
Programmable Keys
5.
Select from "Key 1" through "Key 6".
6.
In the "Type" field, select Call Forward from the list of options.
Expansion Module Keys
7.
Select from "Key 1" through "Key 36" (M670i).
or
Select from "Key 1" through "Key 60" (M675i).
8.
In the "Type" field, select Call Forward from the list of options.
9.
Click Save Settings.
Note:
If there is no CFWD key configured on the phone or it is removed, you can still set the CFWD modes via the IP Phone
UI at the path Options->Call Forward.
155
41-001386-00 REV01 – 06.2013
Advertisement
Table of Contents
