Aastra 6755i User Manual page 113

Configuring a Directory Key
Aastra Web UI
Use the following procedure to configure a Directory key on the 6755i IP Phone. The procedure shows the programmable
key screen as an example.
Note:
By default, the Directory key is Key 2 on the Programmable keys.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Directory.
4. In the "Label" field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Programmable Keys
6. Select from "Key 1" through "Key 6".
7. In the "Type" field, select Directory.
Expansion Module Keys
8. Select from "Key 1" through "Key 36" (M670i).
or
Select from "Key 1" through "Key 60" (M675i).
9. In the "Type" field, select Directory.
10. (M675i) In the "Label" field, enter a label to apply to this key.
11. Click Save Settings.
41-001386-00 REV01 – 06.2013
Line Keys, Programmable Keys, and Softkeys
106