Aastra 6755i User Manual page 111

Configuring a Services Key
Aastra Web UI
Use the following procedure to configure a Services key on the 6755i IP Phone. The procedure shows the programmable
key screen as an example.
Note:
By default, the Services key is Key 1 on the Programmable keys.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Services.
4. In the "Label" field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Programmable Keys
6. Select from "Key 1" through "Key 6".
7. In the "Type" field, select Services.
Expansion Module Keys
8. Select from "Key 1" through "Key 36" (M670i).
or
Select from "Key 1" through "Key 60" (M675i).
9. In the "Type" field, select Services.
10. (M675i) In the "Label" field, enter a label to apply to this key.
11. Click Save Settings.
41-001386-00 REV01 – 06.2013
Line Keys, Programmable Keys, and Softkeys
104