Input Signal; Program; Operation; D-Sub (Analog) Edid Data Write - NEC MultiSync LCD1700NX A Service Manual

1.2 Input Signal

Horizontal synchronization frequency
Vertical synchronization frequency

1.3 Program

Service tool Ver. 3.14 (Parameter ver. 2.0-S9) (Part No. 599910612)

1.4 Operation

1.4.1 D-Sub (Analog) EDID Data Write

1) Connect the EDID data writing unit with jigs, etc. (Refer to a D-SUB connector connection figure)
2) Copy all the files of the service tool Ver. 3.14 (Parameter ver. 2.0-S9) in a proper directory.
3) Start [Service2.EXE] of the service tool Ver. 3.14.
4) When the screen as shown below appears, give a check to [LCD] of [Monitor Type] and press the
[START] button.
: Not specified.
: Not specified.
5-3