Advertisement
VIDEO INPUT SIGNAL
The wave form and timing chart of recommended signals is as follows:
Input Signal Configuration
Horizontal Synchronization
Vertical Synchronization
MAX. 14.61 ms
117 .78 I
l .27ms
11.52 l
16.67 ms
120.00)
� ms
I
,v •
.,>
�,rµ S
1-
63.5µ5
Figures in parentheses applies when the vertical frequency is 50 Hz.
The unit is factory set for the vertical frequency of 60Hz. To use the unit on the 50Hz
vertical frequency, the vertical hold and vertical height must be re-adjusted.
Notes about Video Signal Input:
When a signal other than the recommended one is fed to the monitor as input, the
following may occur:
SYMPTOM
CAUSES
Shrunken screen
Data display period is too short
Expanded screen
Data display period is too long
Image to left or right
Data display period is out of alignment
Moving screen
Synchronization period is different
Dark screen when contrast is reversed
Front and back porch of video signal is missing
Advertisement
