Screen Position Adjustment; Connecting The Power Cord - NEC MultiSync LCD1700NX A Service Manual

SCREEN POSITION ADJUSTMENT

In order to optimize the best viewing position, you can adjust the tilt of the monitor by
using both of your hands to hold the edges of the monitor as shown in the figure below.
The monitor can be adjusted to 30 degrees up or 5 degrees down as indicated by arrow
below.

CONNECTING THE POWER CORD

Check first to make sure that the power cord you use is the correct type required for
your area.
This monitor has a universal AC adapter that allows operation in 100-240 V AC
voltage area. No user-adjustment is required.
Plug one end of the power cord to the AC adapter, plug another end to a proper AC
outlet.
For units to be used at 120 V AC:
Use the supplied power cord or a UL Listed Cord Set, Type SPT-2 wire and plug
rated 7 A/125 V.
For units to be used at 220-240 V AC.
Use a Cord Set consisting of H03VVH2-F cord and plug rated 2.5 A, 250 V. The
cord set should have the appropriate safety approvals for the country in which the
equipment will be installed.
MultiSync LCD1700NX
1-7
5