Page 8
75 mm (LCD1504M) 100 mm (LCD1704M) 100 mm (LCD1904M) 75 mm (LCD1504M) 100 mm (LCD1704M) 100 mm (LCD1904M) 2.9 kg - LCD1504M 4.3 kg -LCD1704M 5.5 kg -LCD1904M...
Page 9
主菜单(图标选择) 主菜单(调整) 按 按 “SELECT” “SELECT” 键 键 按“ SELECT”键 – 示例工具 按 “SELECT”键 按 “–” 或 “+” 子菜单 (图标选择) 使用“–”或 “+”来进行调整 按 “SELECT” 键 按 “–” 或 “+” 按 “SELECT”键 使用“–” or “+”来进行调整 O S M T U R N O F F 子菜单...
C22.2 No. 60950-1. CAN/CSA FCC Information 1. Use the attached specified cables with the LCD1504M (L154F0),LCD1704M (L174F1) or LCD1904M(L194F2) color monitor so as not to interfere with radio and television reception. (2) Please use the supplied shielded video signal cable.
Contents Your new NEC LCD monitor box* should contain the following: • LCD monitor Audio cable • • Power Cord • User’s Manua • Video Signal Cable • Base Stand • Cable Holder Power Cord Video Signal Cable 用户手册 LCD1504M/LCD1704M/LCD1904M User’s Manual...
Quick Start To attach the Base to the LCD Stand: 1. Insert the front of the LCD Stand into the holes in the front of the Base (Figure 1). 2. Next, position the locking tabs on the back side of the LCD Stand with the holes on the Base.
Page 24
Quick Start –continued Figure A.1 AUDIO INPUT Figure B.1 Figure C.1 Headphone Figure A.2 Macintosh Cable Adapter (not included) Input (D-Sub) Cable holder Connect to Computer audio output Power Button Note: Some Macintosh systems do not require a Macintosh Cable Adapter...
Quick Start –continued Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). NOTE: Handle with care when tilting the monitor screen. Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1.
Replace screws 75 mm (LCD1504M) 100 mm (LCD1704M) 100 mm (LCD1904M) Weight of LCD assembly: 2.9 kg - LCD1504M (MAX) 4.3 kg -LCD1704M (MAX) 5.5 kg -LCD1904M (MAX) Thickness of Bracket (Arm) 2.0~3.2 mm Tighten all screws.
Page 27
Controls OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: 1. Basic key function Button SELECT OSM Off OSM displayed OSM On Go to Adjustment (Icon selection stage stage) Go to Icon selection OSM On stage (Adjustment stage)
Page 28
AUDIO Audio volume icon is chosen, depending on the volume condition (AUTO/RESET). BRIGHTNESS Adjusts the overall image and background screen brightness. CONTRAST Adjusts the image brightness in relation to the background. AUTO CONTRAST Adjusts the image displayed for non-standard video inputs. AUTO ADJUST Automatically adjusts the Image Position, H.
Page 29
Controls –continued EXIT Selecting EXIT allows you exit OSM menu/sub menu. LANGUAGE OSM control menus are available in seven languages. OSM TURN OFF The OSM control menu will stay on as long as it is in use. In the OSM Turn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu.
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when...
Page 31
Recommended Use CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
56 Hz to 75 Hz 832 x 624* at 75 Hz 1024 x 768 at 60 Hz to 75 Hz ... NEC DISPLAY SOL UTIONS recommended resolution at 75 Hz for optimal display performance. 304.1 mm/12.0 inches 228.1 mm/9.0 inches...
Page 33
1152 x 864* at 70 Hz 1152 x 870* at 75 Hz NEC DISPLAY SOL UTIONS 1280 x 960* at 60 Hz to 75 Hz recommended resolution at 60 Hz for 1280 x 1024 at 60 Hz to 75 Hz... optimal display performance.
Page 34
1152 x 864* at 70 Hz 1152 x 870* at 75 Hz NEC DISPLAY SOLUTIONS cites 1280 x 960* at 75 Hz recommended resolution at 60 Hz for 1280 x 1024 at 60 Hz to 75 Hz... optimal display performance.
Page 35
Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. Control Systems: Allows you to adjust the colors on your screen and customize COLOR the color accuracy of your monitor to a variety of standards.
For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
TCO’99 Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Page 38
TCO’99 –continued accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound chlorine and bromine. Flame retardants are allowed in the printed circuit boards since no substitutes are available.
This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any agreements made between yourself and NEC.
FCC Rules. Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. U.S. registered trademark. All other brands and product names are trademarks or registered trademarks of their respective owners.