NEC MultiSync LCD1700NX A Service Manual page 17

User's Guide
12
Icon Item
LANGUAGE
RECALL
DEFALTS
OSD TIMEOUT
OSD
LEFT/RIGHT
OSD
DOWN/UP
EXPANSION
Information Indicates the current resolution, V-Frequency(FV), and H-
Frequency(FH).
OSD Messages
NO SIGNAL INPUT This message gives a warning when no signal is present.
OUT OF RANGE This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or
there is a change of input signal or the video signal doesn't
have proper timing, the Out Of Range menu will appear.
Note : For above adjustment action, press + and - simultaneously will return to the
factory default setting.
Function Description
Select among English, French, Italian, Deutsch and
Spanish.
To return the monitor to its default settings.
The OSD menu will stay as long as it is in use. In the
OSD TIMEOUT menu you can select how long the
monitor waits after the last touch of a button to shut
off the OSD menu.
The preset choices are 10, 20, 30, 45, 60 and 90 seconds.
To move the OSD position horizontally on the screen.
When the "+" key is pressed, the OSD control menu
will move to the right side of the screen. Likewise
when the "–" key is pressed, the OSD control menu
will move to the left side.
To move the OSD position vertically on the screen.
When the "+" key is pressed, the OSD control menu
will move to the up side of the screen. Likewise
when the "–" key is pressed, the OSD control menu
will move to the lower side.
The image can be expanded to 1280 x 1024, regardless
of the resolution.
– selects no
+ selects yes
1-14