Rpb (Remote Playback); Rpb Setup - SecurityMan iCamDVR User Manual

Figure 95 - WebCam Surveillance
WebCam is used for monitoring purposes and and PTZ
control of protocols camera(s). To toggle between single
camera and 4 camera view, click on the "Screen 1" and
"Screen 4" accordingly. In single channel view click on
the "Next Page" button to advanced to the next camera in
ascending order. For Pant/Tilt/Zoom controls, i.e. Preset,
Speed, and Configuration please refer to page 38 above in
detail. Click on "exit" at anytime to logout and exit out of
WebCam.
56 | SecurityMan

RPb (Remote Playback)

RPb Setup

RPb is a powerful remote playback software which re-
motely access SuperDVR to retrieve recorded data files to
playback remotely from anywhere at any time. To Setup
RPb enable Web Camera Service and Remote Playback
Service in basic Configuration as illustrated below in
figure 96.
Figure 96 - RPb Setup
NoTICe
To enable RPB (remote playback) service go to configure
RPB service as illustrated above in figure 96. The default
port for RPB is port 1161.