this time will be accumulates and all the pictures will be
sent when the time interval expired. For example; if the
Set Mail Interval is set to 300 seconds (5 minutes) and an
event occurred and emailed out at 7:07:07am, any other
event(s) that occurred after this first occurrence will ac-
cumulates in pictures and events and will be sent out 5
minutes later as illustrated below:
Figure 42 - Set Mail Interval email Sample
NoTICe
Only one picture will be sent per every alarm event. If Set
Mail Interval is in use, an accumulated pictures and events list
will be sent out in a single email with multiple events list and
multiple pictures.
30 | SecurityMan
emap Function Configuration
E-map is use to show geographic area of homes, buildings,
region and etc. which includes locations of cameras layout
in the geographic region. E-map essentially provides geo-
graphic area with camera layouts monitored by SuperDVR
system in a form of a map. This feature is simple to use
and operates with direct status display and it is generally
graded or tiered in the form of a tree diagram.
To setup Emap select "emap" tab from the alarm Con-
figuration panel to enter E-map. Select the "auto-hide"
to enable E-map and configure the Holding time which
ranges from 5, 10, 15, 20, and 30 seconds. Holding time is
the time that E-map will display (pop-up) when an event
occurs until the event expired. To edit E-map simply click
on the "emap edit" button as illustrated below in figure
43.
Figure 43 - emap edit alarm Configuration