Table of Contents
Advertisement
Execute SuperDVR program, then input in the default
user and password to get to the main display interface as
shown below:
Figure 21- SuperDVR Main Display Interface
Display Control Panel
Display Control Panel
Figure 22 - Display control panel
14 | SecurityMan
MaIn DISPlay InteRFaCe
The display control panel is located at the bottom of the
main display/graphic interface which consists of display
modes on the left and disk free space indicator bar in blue
toward the right. The display mode includes next Page,
auto Dwell, Screen 1, Screen 4, & Free Space Blue Bar
active buttons.
next Page
Screen 1 (single channel full screen) has to be activated/
enabled first and then use the next Page button to
manually toggle between each channel.
auto Dwell
channel rotation sequence or auto dwell. The sequence
dwell time can be configured in the basic configuration
setup.
Screen 4
display view.
NOTE
Each button is either green or blue indicator status color.
Where green indicate button is active/enable and blue
indicate button is inactive/disable.
Free Space Blue Bar indicator will display in megabit the
number of free disk space is available out of the total free
space by placing the mouse cursor over the blue bar.
button is associated with Screen 1, where
button is use to enable or disable auto
is used for four channel split/quad screen
Advertisement
Table of Contents
Troubleshooting
