Table of Contents
Advertisement
the camera(s), SuperDVR will detect the movements and
triggers the event recording and also sends Alarm Output
via Buzzer, Remote Alarm, and/or AutoMail.
8. Motion Record Frame Rate ranges from 1fps, 3fps,
7fps, 10fps, 15fps & 30fps which can be selected to save
hard drive space, if space is limited on the hard drive. This
setting will only affect the motion detection recording
frame rate. The lower the frame rate set the more hard
drive space will save.
9. Camera Security
The camera security option is used to secure or unsecure
the camera image depending on the type of users' authen-
tication login. There are three users' types of authenticate:
Normal user, Power user and Administrator. If this option is
selected or checked, only the administrator login can view
the corresponding selected channels/cameras.
10. Record Quality
Record quality ranges from Lowest, Lower, Medium,
Higher, & Highest level of quality. The higher the recording
quality used the more the hard drive space is required, the
better the picture quality. If space is limited, please use the
default Medium setting which is best for balancing picture
quality vs. space.
23 | SecurityMan
11. audio In
Audio input can be setup to record audio and are select-
able between audio1, audio2 or none (no audio recording
or no microphone connection). The iCamDVR provides two
audio hardware channels but only one audio channel can
be selected to be active for recording. Please select the
audio channel that is the closest to a desire camera loca-
tion for recording. Since only one audio channel can be
active please be sure to setup the other 3 camera to none.
NOTICE
One or more record mode can be actively setup, avoid du-
plicate or redundancy date/time setting under each record
mode.
Schedule Configuration Panel
Click on the
tab to enter Schedule Configuration
panel as shown below:
Advertisement
Table of Contents
Troubleshooting
