Manual Record Mode; Schedule Record; Motion Detection Record Mode - SecurityMan iCamDVR User Manual

Figure 24 - Record Status Panel and alarm output Status Panel

Manual Record Mode

Manual Record Mode is the most common record mode
used. This is automatic recording mode where it sustains
the recording until stopped by user.
NoTICe
Higher frame rate can be selected for better picture quality
but requires larger drive space while lower frame rate acquire
less hard drive space but reduces picture quality.
16 | SecurityMan

Schedule Record

Schedule record is used to setup time and days of the
week for recording. This mode can be found under the
"Schedule Configuration" panel of Config. When sched-
ule record is active, the
Status Panel will light green to show the corresponding
channel is in Schedule Record mode. If the schedule record
mode changes to manual record, the green light
will change to teal color LED.
Please refer to "Schedule Configuration" for in depth
details.

Motion Detection Record Mode

Motion detection will enable the system to detect the
changes in the image then activate motion detection,
motion alarm record, and begins to record. For example,
somebody open the door, the system then detects image
changes and begins to record, who opened the door can
be determined when playing back the recorded file. When
there is no movement, the system will not record saving
system resources, hard drive space, and convenient when
searching for event record files. The indicator light color in
the record status panel and Emap will show yellow
when motion is detected.
green light LED in the Record
LED
LED