Windows 2000/Xp Driver Software - SecurityMan iCamDVR User Manual

Windows 2000/XP Driver Software

Installation/Uninstallation
Please reference the above Windows Vista driver software
installation.
Figure 19 - Installation Interface
To uninstall SuperDVR driver software in windows 2000/XP,
please go to, "Control Panel > Add or Remove Programs" ,
and click or select "SuperDVR" to Change/Remove it.
To execute and run the SuperDVR software for iCamDVR;
go to "all Program > SuperDVR" or simply double click
on the SuperDVR shortcut located on the desktop as
shown below.
13 | SecurityMan
Figure 20 - Shortcut of SuperDVR
NoTe
• iCamDVR require PCs with USB 2.0 Host Controller.
• To disconnect or eject iCamDVR from the computer: Left
click on the Safely Remove Hardware icon on the "Taskbar ->
Safely Remove iCamDVR Video/Audio Card".
• Using iCamDVR system with other USB capture devices may
cause conflict, make sure to close other windows capture
software if SuperDVR cannot execute or show error mes-
sages.
• Avoid using two or more USB and PCI video capture devices
on the hosting computer.