In More Detail; Product Functions; Intended Use - Energer ENB539TAS User Manual

800w table saw
Hide thumbs Also See for ENB539TAS:
Table of Contents

Advertisement

GB
GB
ENB539TAS by Energer
IE
IE

Product functions

Operation
Care and maintenance
Trouble shooting
Recycling and disposal
Guarantee
EC declaration of conformity
14
In
more
detail...
15
16
18
21
21
22
23
ENB539TAS by Energer

Intended use

This table saw ENB539TAS is designated with a rated input of 800 Watts. This
product is intended for cutting wood and similar material e.g. MDF and
chipboard, plastic
This product should not be used on other materials or those harmful to health.
It is to be used for dry operation only without water or other cooling liquids.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
Adjust the bevel
Unscrew the securing knobs (8) (anti clockwise ) to adjust the angle of cut.
Retighten the securing knobs once the selected angle has been
determined.
8
Setting rip fence
Unscrew the two securing knobs (8) at both side of rip fence and adjust the
position of the rip fence (4) to align the cut line on the tile layout on the disk
when the tile is pressed against the guide.
After setting the guide, always make sure it is parallel to the disk by
measuring the distance at each end of the scale from gasket (0)on the table.
Tighten the securing knob of the rip fence. (8)
4
8
0
Product functions
GB
GB
IE
IE
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENB539TAS and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents