FR
GB
ENB539TAS by Energer
IE
IE
Additional safety
>
Do not use high speed steel (HS) blades.
>
The push-stick or push block should always be stored with the machine when
not in use safe operation:
• Use push-sticks or push blocks to feed the workpiece past the saw blade;
• Use and correct adjustment of the riving knife;
• Use and correct adjustment of the upper saw blade guard;
• Rebating or grooving should not be carried out unless suitable guarding, such
as a tunnel guard, is fitted above the saw table;
• Saws shall not be used for slotting (stopped groove);
• a table giving guidance on spindle speed selection for different materials to be
sawn shall be given for variable speed tool;
• use only saw blades for which the maximum possible speed is not less than the
maximum spindle speed of the tool and the material to be cut;
• when transporting the machine use only transportation devices and do never
use guards for handling or transportation;
• During transportation the upper part of the saw blade should be covered; for
example by the guard;adjust the parallel stop to the width of workpiece you
require.
>
Feed in the workpiece with two hands. Always use the push stick in the area of
the saw blade.
>
Always push the workpiece through to the end of the splitter.
HEALTH ADVICE
WARNING! When sawing, dust particles will be produced. In some instances,
depending on the materials you are working with, this dust can be particularly
harmful to you (e.g. lead from old gloss paint).
You are advised to consider the risks associated with the materials you are
working with and to reduce the risk of exposure. You should:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as those dust masks that are
specially designed to filter microscopic particles.
10
Technical and legal
information
ENB539TAS by Energer
Unpack
> Unpack all parts and lay them on a flat, stable surface.
> Remove all packing materials and shipping devices if applicable.
> Make sure the delivery contents are complete and free of any
damage. If you find that parts are missing or show damage do not
use the product but contact your dealer. Using an incomplete or
damaged product represents a hazard to people and property.
> Ensure that you have all the accessories and tools needed for
assembly and operation. This also includes proper personal
protective equipment.
You will need
Items not supplied
1. Protective gloves
2. Screwdriver with PH2
head
3. Mounting nuts, bolts and
washers
WARNING! Do not connect to power supply until assembly
is complete. Failure to comply could result in accidental starting
and possible serious injury.
Before you start
Items supplied
1. Saw blade (for wood)
2. Spanner
3. C-wrench
GB
IE
11
Need help?
Do you have a question about the ENB539TAS and is the answer not in the manual?