Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Energer ENB539TAS
Summary of Contents for Energer ENB539TAS
- Page 1 800W Table Saw ENB539TAS Barcode: 5052931254309 WARNING! Read the instructions before using the product!
-
Page 2: Table Of Contents
ENB539TAS by Energer Let’s Thank you for choosing a product it will give you full satisfaction in your get started craft in the work. The band saw is a product easy to use, it comes with accessories. For best use, you must read this noice. -
Page 3: Your Product
Technical and legal Your product ENB539TAS by Energer ENB539TAS by Energer information Your product Technical data Voltage:230-240V~50Hz Rated input:800W, S2:10min Protection class: I degree of protection: IP20 No load speed:2950min -1 Carbide saw blade:Ø200 x Ø30 x 2,4mm Thickness of riving knife:2,2mm Bevel angle range:0 -45º... -
Page 4: Technical And Legal Information
Technical and legal Technical and legal ENB539TAS by Energer ENB539TAS by Energer information information Symbols General safety Warning! Denotes risk of personal injury, loss of life, or damage to the tool in case of non-observance Wear ear protection. WARNING: When using electric tools basic safety precautions should always be followed to reduce the risk Wear eye protection. - Page 5 Technical and legal Technical and legal ENB539TAS by Energer ENB539TAS by Energer information information General safety Additional safety 11 Do not abuse the cord > The bench-type circular saw is designed for the slitting and cross-cutting of all > Never yank the cord to disconnect it from the socket.
- Page 6 Technical and legal Before you start ENB539TAS by Energer ENB539TAS by Energer information Unpack Additional safety > Do not use high speed steel (HS) blades. > Unpack all parts and lay them on a flat, stable surface. > The push-stick or push block should always be stored with the machine when >...
-
Page 7: Before You Start
Before you start Before you start ENB539TAS by Energer ENB539TAS by Energer Install the rip fence Mounting the table saw > Adjust the rip fence (4) to the desired width from the blade using > Locate the mounting holes (14) and set the table on the bench using “M6”... -
Page 8: In More Detail
ENB539TAS by Energer ENB539TAS by Energer Intended use This table saw ENB539TAS is designated with a rated input of 800 Watts. This product is intended for cutting wood and similar material e.g. MDF and chipboard, plastic This product should not be used on other materials or those harmful to health. -
Page 9: Operation
Operation Operation ENB539TAS by Energer ENB539TAS by Energer General operation Straight cut 1. Check the product, its power cord and plug as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. - Page 10 Care and maintenance Care and maintenance ENB539TAS by Energer ENB539TAS by Energer > Replace riving knife Saw blade replacement Unscrew the screws on the table insert with a screwdriver then remove the table insert. Slacken the two screws (make sure the plate under the table is not removed), then If the saw blade is damaged or deformed, please replace the saw blade(refer to insert the riving knife into the slot.Adjust the riving knife (5) so that the gap between...
-
Page 11: Care And Maintenance
Care and maintenance Trouble shooting ENB539TAS by Energer ENB539TAS by Energer Trouble shooting Power cord If the power cord is damaged, it must be replaced by the manufacturer, its Suspected malfunctions are often due to causes that the user can fix service agent or similarly qualified persons in order to avoid a safety hazard. -
Page 12: Guarantee
ENB539TAS by Energer ENB539TAS by Energer conformity Guarantee This ENERGER product carries a guarantee of 12months. If your product develops a fault within this period, you should, in the first instance Declaration of conformity contact the retailer where the item was purchased. - Page 13 Powersmith (UK) LTD. GB-IE Trade House Mead Avenue, BA22 8RT...
Need help?
Do you have a question about the ENB539TAS and is the answer not in the manual?
Questions and answers