Automatically Updating The Clock - Sangean DCR-89+ User Manual

Automatically updating the clock

You can specify that the unit sets its clock from DAB or FM radio broadcasts.
After a power failure the radio will then set its clock the next time that you turn on the radio in
DAB or FM mode. Alternatively you can specify that the time is not automatically updated. In this
case the clock must always be set manually after a power interruption.
. With your radio switched on, press and hold the Menu / Info button to access the setting menu.
. Press the Tuning up / down button until 'System setting 'is highlighted on the display. Press the
select button to enter the setting.
3. Press the Tuning up / down button until 'Time' is highlighted on the display. Press the Select
button to enter the setting.
4. Press the Tuning up / down button until 'Auto update' is highlighted on the display. Press the
Select button to enter the setting.
5. Press the Tuning up / down button to choose an update option from 'Update from DAB', 'Update
from FM', 'Update from Any' or 'No update' as required. Press the Select button to confirm your
choice. The radio will then exit to the previous menu setting.
9