Table of Contents
Advertisement
Display backlight
. In order to view the display when the display backlight is set to a low level, you can press any
button (apart from the On / Standby button) to switch on the backlight without switching on the
radio. The display brightness will increase for 0 seconds before returning to the previous level.
Display Dimmer
Your clock radio has an adjustable dimmer control located at the bottom of the unit. The display
brightness will be increased whenever a button is pressed for about 0 seconds and it will then
revert to a lower level.
. To increase the display brightness rotate the dimmer control clockwise.
. To decrease the display brightness rotate the dimmer control anti-clockwise.
Software version
The software display cannot be altered and is just for your reference.
Ensure your clock radio is switched to the On position.
. Press and hold the Menu/ Info button to enter the setting menu.
. Press the Tuning Up / down button until 'System setting' is shown on the display. Press the
Select button to enter the setting.
3. Press the Tuning up / down button until 'SW version' is shown on the display. Press the Select
button to view the software version of your radio.
GB
6
Hide quick links:
Advertisement
Table of Contents
