Setting The Alarm Times - Sangean DCR-89+ User Manual

Setting the alarm times

Your clock radio has two alarms which can be set to wake you to either radio or buzzer alarm.
Each alarm can be set to sound once, daily, on weekdays or at weekends. The alarms can only
be set when your clock radio is switched on and in DAB or FM mode.
. Press the On / Standby button to switch on the clock radio.
. Press and release the Alarm button. The display will show "Alarm  setup" or press the button
again to enter 'Alarm  setup.'
3. Press the Select button to enter the alarm setting and the display will show 'Alarm  Wizard' or
'Alarm  Wizard.'
4. Press the Tuning Up or Down buttons to choose between 'Alarm On' or 'Alarm Off' and press
the select button to confirm the setting. Choose 'Alarm On' to continue the alarm setting. If 'Alarm
Off' is selected, the current setting for that alarm will be cancelled.
5. Press the Tuning up / down to select the desired hour. Press the Select button to confirm the
setting.
6. Press the Tuning up / down button to select the desired minute. Press the Select button to
confirm the setting.
7. Press the Tuning up / down button to select the duration for the current setting alarm. The options
are 15, 30, 45, 60 and 90. Press the Select button to confirm the setting.
8. Press the Tuning up / down button to choose the desired alarm source (DAB, FM, BUZZER).
Press the Select button to confirm the setting.
Note:
When your alarm is set to wake up by DAB, your clock radio will automatically set to the last
listened station. When FM is selected, the alarm can be set to any of the stations which have
been stored as presets or to the station last listened to.