Automatically Updating The Clock - Sangean DDR-7 Manual

Automatically updating the clock

Your radio will automatically update each time you turn on the radio and
tune to a DAB+ radio station or to an FM station which is broadcasting the
time via RDS. Time display will flash 00:00 for a few seconds then display
the clock time when it receives DAB+ or FM-RDS clock time signal. You
may specify that the radio sets its clock from DAB or FM radio broadcasts.
1.
With your radio switched on, press and hold the Menu button to
access the menu for the current mode.
2.
Rotate the Tuning control knob to select "System Setup". Press the
Select button to enter the system settings menu.
3.
Rotate the Tuning control knob to select "Time update". Press the
Select button to enter the setting.
4.
Rotate the Tuning control knob to choose an update option from "DAB",
"FM" or "Any" as required. Press the Select button to confirm your
choice.
026