Presetting Stations - Dab & Fm; Recalling A Preset Station - Dab& Fm - Sangean DCR-89+ User Manual

Hide thumbs Also See for DCR-89+:
Table of Contents

Advertisement

Presetting stations
You may store your preferred DAB and FM radio stations to the preset station memories. There
are 0 memory presets in your radio, 5 for DAB and 5 for FM. Presets are remembered by your
radio in the event of a power failure.
The procedure for setting presets and using them to tune stations is the same for FM and DAB
modes, and is described below.
. Press the On / Standby button to switch on the clock radio.
. Tune to the required station as previously described.
3. Press and hold down the required Preset button until the display shows, for example, "P stored".
The currently tuned station will be stored under the chosen preset button. Repeat this procedure
for the remaining presets as needed.
4. Stations which have been stored in preset memories may be over written by following the
above procedure.
Recalling a preset station
. Press the On / Standby button to switch on the clock radio.
. Press the Band button to select the desired waveband.
3. Momentarily press the required Preset button. Your clock radio will tune to the station stored in
the preset memory.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents